mirror of
https://github.com/subhobhai943/SUB-OS.git
synced 2026-10-25 16:52:29 +00:00
subhobhai943andClaude Opus 5
7dd8f2219a
Pressing Esc left the desktop and started the shell, but nothing appeared in the
emulator window -- the session was only visible on the host terminal. Once the
VBE adapter is switched into graphics mode the VGA text buffer at 0xB8000 stops
being scanned out, so every printk after that point reached serial and the
dmesg ring but never the display.
Disabling the DISPI interface does not bring the text console back; QEMU keeps
presenting the last framebuffer surface. So rather than clawing the adapter back
to text mode, the console is now rendered into the framebuffer:
drivers/video/fbcon.c draws the console with the shared 8x8 font and carries a
VT100 subset -- SGR colours, cursor addressing, relative moves, erase-display,
erase-line and save/restore. It presents a fixed 80x25 grid, because that is
the geometry the userland assumes (nano pads its bars with %-80s, the shell
wraps at TTY_WIDTH), with the glyph cell scaled to fill the active resolution.
The TTY driver became the console dispatcher: tty_write, tty_clear and
tty_set_cursor route to fbcon while it owns the display. That last one is what
makes nano work -- it positions with tty_set_cursor() rather than escapes, so
its full-screen repaint was landing as an append-only stream.
Also in this change:
- `video=WIDTHxHEIGHT` on the kernel command line selects the display mode,
defaulting to 1280x720 so a 16:9 host panel is filled rather than pillarboxed
when QEMU goes fullscreen. Rejects modes the heap cannot back.
- `make run-fullscreen`, plus zoom-to-fit on the windowed target, so scaling
preserves the guest aspect ratio instead of stretching it.
- QEMU targets raise vgamem_mb, since a 1280x720 32-bit surface exceeds the
default VGA memory.
- bochs_vbe_disable()/fb_set_active() let the framebuffer be marked dormant so
drawing routines no-op after a mode teardown.
Co-Authored-By: Claude Opus 5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01L5yKJT4Wo2cV3rfPrwY5MP
469 lines
17 KiB
Makefile
469 lines
17 KiB
Makefile
# =============================================================================
|
|
# SUB-OS Master Multi-Architecture Linux-Style Makefile
|
|
# Supports: x86_64, aarch64, armv8i
|
|
# Features: Linux Kconfig TUI (make configure / make menuconfig), dynamic Kbuild
|
|
# =============================================================================
|
|
|
|
-include .config
|
|
|
|
# Architecture Selection (Default: x86_64)
|
|
ifdef CONFIG_ARCH
|
|
ARCH ?= $(CONFIG_ARCH)
|
|
else
|
|
ARCH ?= x86_64
|
|
endif
|
|
|
|
BUILD_DIR = build
|
|
BOOT_DIR = boot
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Toolchain & Architecture Flags
|
|
# -----------------------------------------------------------------------------
|
|
ifeq ($(ARCH), x86_64)
|
|
CROSS_COMPILE ?= x86_64-elf-
|
|
CC = $(CROSS_COMPILE)gcc
|
|
LD = $(CROSS_COMPILE)ld
|
|
OBJCOPY = $(CROSS_COMPILE)objcopy
|
|
ASM = nasm
|
|
|
|
CFLAGS = -ffreestanding \
|
|
-fno-pie \
|
|
-fno-pic \
|
|
-mno-red-zone \
|
|
-mno-mmx \
|
|
-mno-sse \
|
|
-mno-sse2 \
|
|
-mcmodel=kernel \
|
|
-Wall \
|
|
-Wextra \
|
|
-Wno-unused-function \
|
|
-Wno-unused-parameter \
|
|
$(if $(CONFIG_OPTIMIZATION),$(CONFIG_OPTIMIZATION),-O2) \
|
|
-Iinclude \
|
|
-D__x86_64__
|
|
|
|
ASMFLAGS_ELF = -f elf64
|
|
ASMFLAGS_BOOT = -f bin -I$(BOOT_DIR)/
|
|
LDFLAGS = -nostdlib -no-pie -T linker.ld
|
|
|
|
ARCH_C_SRCS = $(shell find arch/x86_64 -name '*.c' 2>/dev/null)
|
|
ARCH_ASM_SRCS = $(shell find arch/x86_64 -name '*.asm' 2>/dev/null)
|
|
ENTRY_OBJ = $(BUILD_DIR)/arch/x86_64/boot/entry.o
|
|
IMAGE = SUB-OS.img
|
|
TARGET = $(IMAGE)
|
|
QEMU_CMD = qemu-system-x86_64 -drive format=raw,file=$(IMAGE) \
|
|
-netdev user,id=net0,hostfwd=tcp::2222-:22,hostfwd=tcp::8080-:80 \
|
|
-device e1000,netdev=net0 -serial stdio -display none
|
|
|
|
else ifneq ($(filter $(ARCH), aarch64 arm64),)
|
|
CROSS_COMPILE ?= aarch64-linux-gnu-
|
|
CC = $(CROSS_COMPILE)gcc
|
|
LD = $(CROSS_COMPILE)ld
|
|
OBJCOPY = $(CROSS_COMPILE)objcopy
|
|
AS = $(CROSS_COMPILE)as
|
|
|
|
CFLAGS = -ffreestanding \
|
|
-fno-pie \
|
|
-fno-pic \
|
|
-Wall \
|
|
-Wextra \
|
|
-Wno-unused-function \
|
|
-Wno-unused-parameter \
|
|
-mno-outline-atomics \
|
|
$(if $(CONFIG_OPTIMIZATION),$(CONFIG_OPTIMIZATION),-O2) \
|
|
-Iinclude \
|
|
-D__aarch64__ \
|
|
-march=armv8-a
|
|
|
|
LDFLAGS = -nostdlib -no-pie -T arch/aarch64/linker.ld
|
|
|
|
ARCH_C_SRCS = $(shell find arch/aarch64 -name '*.c' 2>/dev/null)
|
|
ARCH_S_SRCS = $(shell find arch/aarch64 -name '*.S' 2>/dev/null)
|
|
ENTRY_OBJ = $(BUILD_DIR)/arch/aarch64/boot/entry.o
|
|
TARGET = $(BUILD_DIR)/kernel.elf
|
|
QEMU_CMD = qemu-system-aarch64 -M virt -cpu cortex-a57 -m 128M -nographic -kernel $(BUILD_DIR)/kernel.elf
|
|
|
|
else ifneq ($(filter $(ARCH), armv8i armv81 arm32 arm armv7 armv7-a armv7a aarch32),)
|
|
CROSS_COMPILE ?= arm-linux-gnueabihf-
|
|
CC = $(CROSS_COMPILE)gcc
|
|
LD = $(CROSS_COMPILE)ld
|
|
OBJCOPY = $(CROSS_COMPILE)objcopy
|
|
AS = $(CROSS_COMPILE)as
|
|
|
|
CFLAGS = -ffreestanding \
|
|
-fno-pie \
|
|
-fno-pic \
|
|
-Wall \
|
|
-Wextra \
|
|
-Wno-unused-function \
|
|
-Wno-unused-parameter \
|
|
$(if $(CONFIG_OPTIMIZATION),$(CONFIG_OPTIMIZATION),-O2) \
|
|
-Iinclude \
|
|
-D__arm__ \
|
|
-D__armv8i__ \
|
|
-mcpu=cortex-a15 \
|
|
-mfpu=neon-vfpv4 \
|
|
-mfloat-abi=hard \
|
|
-marm
|
|
|
|
LDFLAGS = -nostdlib -no-pie -T arch/armv8i/linker.ld
|
|
|
|
ARCH_C_SRCS = $(shell find arch/armv8i -name '*.c' 2>/dev/null)
|
|
ARCH_S_SRCS = $(shell find arch/armv8i -name '*.S' 2>/dev/null)
|
|
ENTRY_OBJ = $(BUILD_DIR)/arch/armv8i/boot/entry.o
|
|
TARGET = $(BUILD_DIR)/kernel.elf
|
|
QEMU_CMD = qemu-system-arm -M virt -cpu cortex-a15 -m 128M -nographic -kernel $(BUILD_DIR)/kernel.elf
|
|
|
|
else
|
|
$(error Unsupported Architecture '$(ARCH)'. Supported: x86_64, aarch64, armv8i)
|
|
endif
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Linux-Style Configurable Kernel Subsystems (Kbuild-Style)
|
|
# -----------------------------------------------------------------------------
|
|
CORE_SRCS = kernel/main.c kernel/task.c kernel/sync.c kernel/timer.c kernel/printk.c \
|
|
kernel/panic.c kernel/trace.c kernel/sched.c kernel/cron.c kernel/syscall.c \
|
|
kernel/syslog.c kernel/module.c kernel/kobject.c kernel/metrics.c kernel/namespace.c \
|
|
kernel/signal.c kernel/workqueue.c kernel/tsc.c kernel/vt_art.c \
|
|
kernel/sub/sub_runtime.c kernel/sub/sub_vm.c \
|
|
kernel/wait.c kernel/futex.c kernel/rcu.c kernel/ktest.c \
|
|
lib/string.c lib/vsprintf.c lib/bitmap.c lib/rbtree.c lib/kfifo.c lib/hashtable.c lib/font8x8.c \
|
|
init/cmdline.c init/service.c init/bootlogo.c init/logo_data.c usr/initramfs.c block/block.c block/elevator.c \
|
|
ipc/sem.c ipc/shm.c ipc/shm_posix.c ipc/pipe.c ipc/ipc.c ipc/msg.c \
|
|
crypto/sha256.c crypto/md5.c crypto/crc32.c crypto/prng.c sound/beep.c
|
|
|
|
# If no .config exists, default all core options to y
|
|
ifeq ($(wildcard .config),)
|
|
CONFIG_MM_PMM = y
|
|
CONFIG_MM_SLAB = y
|
|
CONFIG_MM_VMA = y
|
|
CONFIG_FS_VFS = y
|
|
CONFIG_FS_FAT32 = y
|
|
CONFIG_FS_EXT2 = y
|
|
CONFIG_FS_SYSFS = y
|
|
CONFIG_DRV_RAMDISK = y
|
|
CONFIG_DRV_AHCI = y
|
|
CONFIG_DRV_NVME = y
|
|
CONFIG_DRV_ATA = y
|
|
CONFIG_DRV_VIRTIO_BLK = y
|
|
CONFIG_NET_STACK = y
|
|
CONFIG_NET_FILTER = y
|
|
CONFIG_NET_HTTPD = y
|
|
CONFIG_NET_SSHD = y
|
|
CONFIG_DRV_E1000 = y
|
|
CONFIG_DRV_RTL8139 = y
|
|
CONFIG_DRV_VIRTIO_NET = y
|
|
CONFIG_DRV_PTY = y
|
|
CONFIG_DRV_VIRTIO_RNG = y
|
|
CONFIG_DRV_CANVAS_2D = y
|
|
CONFIG_DRV_BOCHS_VBE = y
|
|
CONFIG_DRV_SOUND_HDA = y
|
|
CONFIG_DRV_SOUND_AC97 = y
|
|
CONFIG_DRV_USB_XHCI = y
|
|
CONFIG_DRV_HWMON = y
|
|
CONFIG_SECURITY_LSM = y
|
|
CONFIG_SECURITY_KEYRING = y
|
|
CONFIG_BPF_VM = y
|
|
CONFIG_IO_URING = y
|
|
CONFIG_USERLAND_LAZYBOX = y
|
|
endif
|
|
|
|
CONFIG_SRCS-y := $(CORE_SRCS)
|
|
|
|
ifeq ($(CONFIG_MM_PMM), y)
|
|
CONFIG_SRCS-y += mm/pmm.c mm/kmalloc.c mm/page_cache.c
|
|
endif
|
|
ifeq ($(CONFIG_MM_SLAB), y)
|
|
CONFIG_SRCS-y += mm/slab.c
|
|
endif
|
|
ifeq ($(CONFIG_MM_VMA), y)
|
|
CONFIG_SRCS-y += mm/vma.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_BPF_VM), y)
|
|
CONFIG_SRCS-y += kernel/bpf.c
|
|
endif
|
|
ifeq ($(CONFIG_IO_URING), y)
|
|
CONFIG_SRCS-y += io_uring/io_uring.c
|
|
endif
|
|
ifeq ($(CONFIG_SECURITY_LSM), y)
|
|
CONFIG_SRCS-y += security/lsm.c security/auth.c
|
|
endif
|
|
ifeq ($(CONFIG_SECURITY_KEYRING), y)
|
|
CONFIG_SRCS-y += certs/x509.c
|
|
endif
|
|
|
|
# Filesystems
|
|
ifeq ($(CONFIG_FS_VFS), y)
|
|
CONFIG_SRCS-y += fs/vfs.c fs/ramfs.c fs/devfs.c fs/procfs.c
|
|
endif
|
|
ifeq ($(CONFIG_FS_FAT32), y)
|
|
CONFIG_SRCS-y += fs/fat32.c
|
|
endif
|
|
ifeq ($(CONFIG_FS_EXT2), y)
|
|
CONFIG_SRCS-y += fs/ext2.c
|
|
endif
|
|
ifeq ($(CONFIG_FS_SYSFS), y)
|
|
CONFIG_SRCS-y += fs/sysfs.c
|
|
endif
|
|
|
|
# Storage Drivers
|
|
ifeq ($(CONFIG_DRV_RAMDISK), y)
|
|
CONFIG_SRCS-y += drivers/block/ramdisk.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_AHCI), y)
|
|
CONFIG_SRCS-y += drivers/block/ahci.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_NVME), y)
|
|
CONFIG_SRCS-y += drivers/block/nvme.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_ATA), y)
|
|
CONFIG_SRCS-y += drivers/block/ata.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_VIRTIO_BLK), y)
|
|
CONFIG_SRCS-y += drivers/virtio/virtio_blk.c virt/virtio.c virt/hypervisor.c
|
|
endif
|
|
|
|
# Network Subsystem
|
|
ifeq ($(CONFIG_NET_STACK), y)
|
|
CONFIG_SRCS-y += net/core/net.c net/core/socket.c net/ipv4/tcp.c net/ipv4/udp.c net/ipv4/dhcp.c net/ipv4/dns.c net/ipv4/dns_cache.c
|
|
endif
|
|
ifeq ($(CONFIG_NET_FILTER), y)
|
|
CONFIG_SRCS-y += net/filter.c
|
|
endif
|
|
ifeq ($(CONFIG_NET_HTTPD), y)
|
|
CONFIG_SRCS-y += net/httpd.c
|
|
endif
|
|
ifeq ($(CONFIG_NET_SSHD), y)
|
|
CONFIG_SRCS-y += net/ssh.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_E1000), y)
|
|
CONFIG_SRCS-y += drivers/net/e1000.c drivers/pci/pci.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_RTL8139), y)
|
|
CONFIG_SRCS-y += drivers/net/rtl8139.c drivers/pci/pci.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_VIRTIO_NET), y)
|
|
CONFIG_SRCS-y += drivers/virtio/virtio_net.c virt/virtio.c
|
|
endif
|
|
|
|
# Character, Audio, Video Drivers
|
|
ifeq ($(CONFIG_DRV_PTY), y)
|
|
CONFIG_SRCS-y += drivers/char/pty.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_VIRTIO_RNG), y)
|
|
CONFIG_SRCS-y += drivers/char/virtio_rng.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_USB_XHCI), y)
|
|
CONFIG_SRCS-y += drivers/usb/xhci.c drivers/usb/usb.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_HWMON), y)
|
|
CONFIG_SRCS-y += drivers/hwmon/coretemp.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_CANVAS_2D), y)
|
|
CONFIG_SRCS-y += drivers/video/canvas.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_BOCHS_VBE), y)
|
|
CONFIG_SRCS-y += drivers/video/bochs.c drivers/video/fb.c drivers/video/fbcon.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_SOUND_HDA), y)
|
|
CONFIG_SRCS-y += sound/hda.c sound/sound.c sound/pcm.c sound/tts.c sound/melody.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_SOUND_AC97), y)
|
|
CONFIG_SRCS-y += sound/ac97.c sound/sound.c sound/pcm.c
|
|
endif
|
|
|
|
# Common Input/Display/Power/GPU/Networking Drivers
|
|
CONFIG_SRCS-y += drivers/char/tty.c drivers/char/keyboard.c drivers/char/serial.c drivers/char/vga.c \
|
|
drivers/input/mouse.c drivers/power/acpi.c drivers/power/cpufreq.c drivers/rtc/rtc.c drivers/sound/speaker.c \
|
|
drivers/net/e1000e.c drivers/virtio/virtio_gpu.c drivers/virtio/virtio_input.c
|
|
|
|
# Userland
|
|
ifeq ($(CONFIG_USERLAND_LAZYBOX), y)
|
|
CONFIG_SRCS-y += userland/lazybox/lazybox.c userland/lazybox/shell.c userland/lazybox/sh.c userland/lazybox/nano.c userland/lazybox/snake.c userland/lazybox/tree.c userland/lazybox/coreutils.c
|
|
endif
|
|
|
|
# Deduplicate
|
|
CONFIG_SRCS-y := $(sort $(CONFIG_SRCS-y))
|
|
|
|
# Rust & C++ Layer Configuration
|
|
ifeq ($(ARCH), x86_64)
|
|
RUSTC ?= rustc
|
|
RUST_SRCS = $(shell find rust/src -name '*.rs' 2>/dev/null)
|
|
RUST_LIB = $(BUILD_DIR)/rust/librust_kernel.a
|
|
CXX ?= g++
|
|
CXXFLAGS = -ffreestanding -fno-pie -fno-pic -mno-red-zone -mno-mmx -mno-sse -mno-sse2 \
|
|
-mcmodel=kernel -Wall -Wextra -Wno-unused-function -Wno-unused-parameter \
|
|
$(if $(CONFIG_OPTIMIZATION),$(CONFIG_OPTIMIZATION),-O2) -Iinclude -D__x86_64__ \
|
|
-std=c++17 -fno-exceptions -fno-rtti -fno-threadsafe-statics -fno-use-cxa-atexit
|
|
CPP_SRCS = $(shell find kernel/cpp -name '*.cpp' 2>/dev/null)
|
|
CPP_OBJS = $(patsubst %.cpp, $(BUILD_DIR)/%.o, $(CPP_SRCS))
|
|
ALL_C_SRCS = $(ARCH_C_SRCS) $(CONFIG_SRCS-y)
|
|
C_OBJS = $(patsubst %.c, $(BUILD_DIR)/%.o, $(ALL_C_SRCS))
|
|
ASM_OBJS = $(patsubst %.asm, $(BUILD_DIR)/%.o, $(ARCH_ASM_SRCS))
|
|
OTHER_OBJS = $(filter-out $(ENTRY_OBJ), $(ASM_OBJS) $(C_OBJS)) $(CPP_OBJS) $(RUST_LIB)
|
|
else
|
|
CONFIG_SRCS-y += rust/rust_fallback.c kernel/cpp/cpp_fallback.c
|
|
ALL_C_SRCS = $(ARCH_C_SRCS) $(CONFIG_SRCS-y)
|
|
C_OBJS = $(patsubst %.c, $(BUILD_DIR)/%.o, $(ALL_C_SRCS))
|
|
S_OBJS = $(patsubst %.S, $(BUILD_DIR)/%.o, $(ARCH_S_SRCS))
|
|
OTHER_OBJS = $(filter-out $(ENTRY_OBJ), $(S_OBJS) $(C_OBJS))
|
|
endif
|
|
|
|
# Generated dependency files, one per object. The include lives at the very
|
|
# end of this file: a .d file's first rule would otherwise become make's
|
|
# default goal and turn a bare `make` into a no-op.
|
|
DEPS = $(C_OBJS:.o=.d) $(CPP_OBJS:.o=.d) $(S_OBJS:.o=.d)
|
|
|
|
.DEFAULT_GOAL := all
|
|
|
|
.PHONY: all clean run run-fullscreen debug info configure menuconfig config tui nconfig defconfig x86_64_defconfig aarch64_defconfig armv8_defconfig armv8i_defconfig armv81_defconfig arm32_defconfig qemu help
|
|
|
|
all: $(TARGET)
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Configuration Targets (Linux Kconfig TUI Configurator)
|
|
# -----------------------------------------------------------------------------
|
|
configure menuconfig config tui nconfig:
|
|
@python3 scripts/kconfig/menuconfig.py
|
|
|
|
defconfig:
|
|
@python3 scripts/kconfig/menuconfig.py --defconfig $(ARCH)
|
|
|
|
x86_64_defconfig:
|
|
@python3 scripts/kconfig/menuconfig.py --x86_64
|
|
|
|
aarch64_defconfig:
|
|
@python3 scripts/kconfig/menuconfig.py --aarch64
|
|
|
|
armv8_defconfig armv8i_defconfig armv81_defconfig arm32_defconfig:
|
|
@python3 scripts/kconfig/menuconfig.py --armv8i
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Compilation Rules
|
|
# -----------------------------------------------------------------------------
|
|
# Header dependency tracking: without this a header change leaves stale objects
|
|
# behind, and a struct layout edit silently corrupts every unrebuilt caller.
|
|
DEPFLAGS = -MMD -MP
|
|
|
|
# C Source Files
|
|
$(BUILD_DIR)/%.o: %.c include/config/autoconf.h
|
|
@mkdir -p $(dir $@)
|
|
$(CC) $(CFLAGS) $(DEPFLAGS) -c $< -o $@
|
|
|
|
# C++ Source Files
|
|
$(BUILD_DIR)/%.o: %.cpp include/config/autoconf.h
|
|
@mkdir -p $(dir $@)
|
|
$(CXX) $(CXXFLAGS) $(DEPFLAGS) -c $< -o $@
|
|
|
|
# x86_64 NASM Assembly Files
|
|
$(BUILD_DIR)/%.o: %.asm
|
|
@mkdir -p $(dir $@)
|
|
$(ASM) $(ASMFLAGS_ELF) $< -o $@
|
|
|
|
# ARM/AArch64 GNU Assembly Files (.S)
|
|
$(BUILD_DIR)/%.o: %.S
|
|
@mkdir -p $(dir $@)
|
|
$(CC) $(CFLAGS) $(DEPFLAGS) -c $< -o $@
|
|
|
|
# Rust Source Compilation
|
|
$(RUST_LIB): rust/src/lib.rs $(RUST_SRCS)
|
|
@mkdir -p $(dir $@)
|
|
$(RUSTC) --crate-type staticlib -C panic=abort -C relocation-model=static -C opt-level=2 -C no-redzone=y -o $@ rust/src/lib.rs
|
|
|
|
|
|
# Header Generation Fallback
|
|
include/config/autoconf.h:
|
|
@mkdir -p include/config
|
|
@if [ ! -f .config ]; then python3 scripts/kconfig/menuconfig.py --defconfig $(ARCH); fi
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Link & Image Assembly
|
|
# -----------------------------------------------------------------------------
|
|
$(BUILD_DIR)/boot/boot.bin: $(BOOT_DIR)/boot.asm | $(BUILD_DIR)/boot
|
|
$(ASM) $(ASMFLAGS_BOOT) $< -o $@
|
|
|
|
$(BUILD_DIR)/boot/stage2.bin: $(BOOT_DIR)/stage2.asm $(BOOT_DIR)/gdt.asm | $(BUILD_DIR)/boot
|
|
$(ASM) $(ASMFLAGS_BOOT) $< -o $@
|
|
|
|
$(BUILD_DIR)/boot:
|
|
mkdir -p $(BUILD_DIR)/boot
|
|
|
|
LIBGCC ?= $(shell $(CC) $(CFLAGS) -print-libgcc-file-name 2>/dev/null)
|
|
|
|
$(BUILD_DIR)/kernel.elf: $(ENTRY_OBJ) $(OTHER_OBJS)
|
|
$(LD) $(LDFLAGS) -o $@ $(ENTRY_OBJ) $(OTHER_OBJS) $(LIBGCC)
|
|
@echo "=== [Kernel ELF Linked: $@ (Architecture: $(ARCH))] ==="
|
|
|
|
$(BUILD_DIR)/kernel.bin: $(BUILD_DIR)/kernel.elf
|
|
$(OBJCOPY) -O binary $< $@
|
|
|
|
$(IMAGE): $(BUILD_DIR)/boot/boot.bin $(BUILD_DIR)/boot/stage2.bin $(BUILD_DIR)/kernel.bin
|
|
dd if=/dev/zero of=$@ bs=512 count=2880 status=none
|
|
dd if=$(BUILD_DIR)/boot/boot.bin of=$@ bs=512 conv=notrunc status=none
|
|
dd if=$(BUILD_DIR)/boot/stage2.bin of=$@ bs=512 seek=1 conv=notrunc status=none
|
|
dd if=$(BUILD_DIR)/kernel.bin of=$@ bs=512 seek=16 conv=notrunc status=none
|
|
@echo "=== [SUB-OS x86_64 Disk Image Built: $@ (Size: $$(du -h $@ | cut -f1))] ==="
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Execution & Emulation Targets
|
|
# -----------------------------------------------------------------------------
|
|
run qemu: $(TARGET)
|
|
$(QEMU_CMD)
|
|
|
|
# -vga std gives the Bochs VBE adapter the kernel drives. vgamem_mb is raised
|
|
# because a 1280x720 32-bit framebuffer needs more than the 8 MB default.
|
|
QEMU_VGA = -device VGA,vgamem_mb=32
|
|
|
|
run-gui: $(TARGET)
|
|
ifeq ($(ARCH), x86_64)
|
|
qemu-system-x86_64 -drive format=raw,file=$(IMAGE) \
|
|
-netdev user,id=net0,hostfwd=tcp::2222-:22,hostfwd=tcp::8080-:80 \
|
|
-device e1000,netdev=net0 -serial stdio
|
|
else ifneq ($(filter $(ARCH), aarch64 arm64),)
|
|
qemu-system-aarch64 -M virt -cpu cortex-a57 -m 128M -kernel $(BUILD_DIR)/kernel.elf -serial stdio
|
|
else
|
|
qemu-system-arm -M virt -cpu cortex-a15 -m 128M -kernel $(BUILD_DIR)/kernel.elf -serial stdio
|
|
endif
|
|
|
|
run-server: $(IMAGE)
|
|
qemu-system-x86_64 -drive format=raw,file=$(IMAGE) \
|
|
-netdev user,id=net0,hostfwd=tcp::2222-:22,hostfwd=tcp::8080-:80 \
|
|
-device e1000,netdev=net0 -serial stdio -display none
|
|
|
|
debug: $(TARGET)
|
|
ifeq ($(ARCH), x86_64)
|
|
qemu-system-x86_64 -drive format=raw,file=$(IMAGE) \
|
|
-netdev user,id=net0,hostfwd=tcp::2222-:22,hostfwd=tcp::8080-:80 \
|
|
-device e1000,netdev=net0 -serial stdio -s -S
|
|
else ifneq ($(filter $(ARCH), aarch64 arm64),)
|
|
qemu-system-aarch64 -M virt -cpu cortex-a57 -m 128M -nographic -kernel $(BUILD_DIR)/kernel.elf -s -S
|
|
else
|
|
qemu-system-arm -M virt -cpu cortex-a15 -m 128M -nographic -kernel $(BUILD_DIR)/kernel.elf -s -S
|
|
endif
|
|
|
|
info:
|
|
@echo "Target Architecture: $(ARCH)"
|
|
@echo "Cross Compiler: $(CROSS_COMPILE)"
|
|
@echo "Compiled Sources: $(words $(ALL_C_SRCS)) C files"
|
|
@echo "Target Binary: $(TARGET)"
|
|
|
|
help:
|
|
@echo "SUB-OS Kernel Build System (Linux-Style Kconfig)"
|
|
@echo "=================================================="
|
|
@echo " make configure - Launch interactive Linux-style TUI Configurator"
|
|
@echo " make menuconfig - Alias for make configure"
|
|
@echo " make defconfig - Reset to default configuration for active ARCH"
|
|
@echo " make x86_64_defconfig - Load x86_64 default configuration"
|
|
@echo " make aarch64_defconfig- Load AArch64 default configuration"
|
|
@echo " make armv8i_defconfig - Load ARMv8i (32-bit ARM) default configuration"
|
|
@echo " make all [ARCH=...] - Compile kernel image for selected architecture"
|
|
@echo " make qemu [ARCH=...] - Boot the compiled kernel in QEMU emulator"
|
|
@echo " make clean - Remove all compiled objects and disk images"
|
|
@echo " make info - Display build configuration and source metrics"
|
|
|
|
clean:
|
|
rm -rf $(BUILD_DIR) $(IMAGE)
|
|
|
|
-include $(DEPS)
|