mirror of
https://github.com/subhobhai943/SUB-OS.git
synced 2026-10-25 16:52:29 +00:00
subhobhai943andClaude Opus 4.8
0377726615
Add three real platform device drivers (x86 hardware, ARM-stubbed): - drivers/timer/hpet.c + include/drivers/hpet.h: High Precision Event Timer. Maps the HPET block at the standard 0xFED00000, reads the femtosecond period from the capability register, enables the main counter and exposes a monotonic nanosecond time source (hpet_get_ns) far finer than the 100 Hz PIT. - drivers/char/lpt.c + include/drivers/lpt.h: IBM PC parallel port (LPT1) with the Centronics data/strobe handshake over ports 0x378/0x379/0x37A. - drivers/char/nvram.c + include/drivers/nvram.h: MC146818 CMOS NVRAM read/write over 0x70/0x71, preserving the NMI-disable bit, with checksum and hex dump. Wired all three into the [5/14] device-enumeration boot step and added LazyBox applets `hpet`, `lpt`, and `nvram`. Verified live under QEMU (screenshotted): HPET reports 100 MHz / 3 comparators / 10 ns period and its counter advances ~1.4 s of real time between two `hpet` runs; NVRAM dumps 128 bytes with a computed checksum; LPT1 detected at 0x378. Clean build on x86_64/aarch64/armv8i; 0 panics / 0 OOM. Co-Authored-By: Claude Opus 4.8 <[email protected]> Claude-Session: https://claude.ai/code/session_01Fh5z6V7nGPbHvqVG5p4CXX
541 lines
21 KiB
Makefile
541 lines
21 KiB
Makefile
# =============================================================================
|
|
# SUB-OS Master Multi-Architecture Linux-Style Makefile
|
|
# Supports: x86_64, aarch64, armv8i
|
|
# Features: Linux Kconfig TUI (make configure / make menuconfig), dynamic Kbuild
|
|
# =============================================================================
|
|
|
|
-include .config
|
|
|
|
# Architecture Selection (Default: x86_64)
|
|
ifdef CONFIG_ARCH
|
|
ARCH ?= $(CONFIG_ARCH)
|
|
else
|
|
ARCH ?= x86_64
|
|
endif
|
|
|
|
BUILD_DIR = build
|
|
BOOT_DIR = boot
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Toolchain & Architecture Flags
|
|
# -----------------------------------------------------------------------------
|
|
ifeq ($(ARCH), x86_64)
|
|
CROSS_COMPILE ?= x86_64-elf-
|
|
CC = $(CROSS_COMPILE)gcc
|
|
LD = $(CROSS_COMPILE)ld
|
|
OBJCOPY = $(CROSS_COMPILE)objcopy
|
|
ASM = nasm
|
|
|
|
CFLAGS = -ffreestanding \
|
|
-fno-pie \
|
|
-fno-pic \
|
|
-mno-red-zone \
|
|
-mno-mmx \
|
|
-mno-sse \
|
|
-mno-sse2 \
|
|
-mcmodel=kernel \
|
|
-Wall \
|
|
-Wextra \
|
|
-Wno-unused-function \
|
|
-Wno-unused-parameter \
|
|
$(if $(CONFIG_OPTIMIZATION),$(CONFIG_OPTIMIZATION),-O2) \
|
|
-Iinclude \
|
|
-D__x86_64__
|
|
|
|
ASMFLAGS_ELF = -f elf64
|
|
ASMFLAGS_BOOT = -f bin -I$(BOOT_DIR)/
|
|
LDFLAGS = -nostdlib -no-pie -T linker.ld
|
|
|
|
ARCH_C_SRCS = $(shell find arch/x86_64 -name '*.c' 2>/dev/null)
|
|
ARCH_ASM_SRCS = $(shell find arch/x86_64 -name '*.asm' 2>/dev/null)
|
|
ENTRY_OBJ = $(BUILD_DIR)/arch/x86_64/boot/entry.o
|
|
IMAGE = SUB-OS.img
|
|
TARGET = $(IMAGE)
|
|
QEMU_CMD = qemu-system-x86_64 -drive format=raw,file=$(IMAGE) \
|
|
-netdev user,id=net0,hostfwd=tcp::2222-:22,hostfwd=tcp::8080-:80 \
|
|
-device e1000,netdev=net0 -serial stdio -display none
|
|
|
|
else ifneq ($(filter $(ARCH), aarch64 arm64),)
|
|
CROSS_COMPILE ?= aarch64-linux-gnu-
|
|
CC = $(CROSS_COMPILE)gcc
|
|
LD = $(CROSS_COMPILE)ld
|
|
OBJCOPY = $(CROSS_COMPILE)objcopy
|
|
AS = $(CROSS_COMPILE)as
|
|
|
|
CFLAGS = -ffreestanding \
|
|
-fno-pie \
|
|
-fno-pic \
|
|
-Wall \
|
|
-Wextra \
|
|
-Wno-unused-function \
|
|
-Wno-unused-parameter \
|
|
-mno-outline-atomics \
|
|
$(if $(CONFIG_OPTIMIZATION),$(CONFIG_OPTIMIZATION),-O2) \
|
|
-Iinclude \
|
|
-D__aarch64__ \
|
|
-march=armv8-a
|
|
|
|
LDFLAGS = -nostdlib -no-pie -T arch/aarch64/linker.ld
|
|
|
|
ARCH_C_SRCS = $(shell find arch/aarch64 -name '*.c' 2>/dev/null)
|
|
ARCH_S_SRCS = $(shell find arch/aarch64 -name '*.S' 2>/dev/null)
|
|
ENTRY_OBJ = $(BUILD_DIR)/arch/aarch64/boot/entry.o
|
|
TARGET = $(BUILD_DIR)/kernel.elf
|
|
QEMU_CMD = qemu-system-aarch64 -M virt -cpu cortex-a57 -m 128M -nographic -kernel $(BUILD_DIR)/kernel.elf
|
|
|
|
else ifneq ($(filter $(ARCH), armv8i armv81 arm32 arm armv7 armv7-a armv7a aarch32),)
|
|
CROSS_COMPILE ?= arm-linux-gnueabihf-
|
|
CC = $(CROSS_COMPILE)gcc
|
|
LD = $(CROSS_COMPILE)ld
|
|
OBJCOPY = $(CROSS_COMPILE)objcopy
|
|
AS = $(CROSS_COMPILE)as
|
|
|
|
CFLAGS = -ffreestanding \
|
|
-fno-pie \
|
|
-fno-pic \
|
|
-Wall \
|
|
-Wextra \
|
|
-Wno-unused-function \
|
|
-Wno-unused-parameter \
|
|
$(if $(CONFIG_OPTIMIZATION),$(CONFIG_OPTIMIZATION),-O2) \
|
|
-Iinclude \
|
|
-D__arm__ \
|
|
-D__armv8i__ \
|
|
-mcpu=cortex-a15 \
|
|
-mfpu=neon-vfpv4 \
|
|
-mfloat-abi=hard \
|
|
-marm
|
|
|
|
LDFLAGS = -nostdlib -no-pie -T arch/armv8i/linker.ld
|
|
|
|
ARCH_C_SRCS = $(shell find arch/armv8i -name '*.c' 2>/dev/null)
|
|
ARCH_S_SRCS = $(shell find arch/armv8i -name '*.S' 2>/dev/null)
|
|
ENTRY_OBJ = $(BUILD_DIR)/arch/armv8i/boot/entry.o
|
|
TARGET = $(BUILD_DIR)/kernel.elf
|
|
QEMU_CMD = qemu-system-arm -M virt -cpu cortex-a15 -m 128M -nographic -kernel $(BUILD_DIR)/kernel.elf
|
|
|
|
else
|
|
$(error Unsupported Architecture '$(ARCH)'. Supported: x86_64, aarch64, armv8i)
|
|
endif
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Linux-Style Configurable Kernel Subsystems (Kbuild-Style)
|
|
# -----------------------------------------------------------------------------
|
|
CORE_SRCS = kernel/main.c kernel/task.c kernel/sync.c kernel/timer.c kernel/printk.c \
|
|
kernel/panic.c kernel/trace.c kernel/sched.c kernel/cron.c kernel/syscall.c \
|
|
kernel/syslog.c kernel/module.c kernel/kobject.c kernel/metrics.c kernel/namespace.c \
|
|
kernel/signal.c kernel/workqueue.c kernel/tsc.c kernel/vt_art.c \
|
|
kernel/sub/sub_runtime.c kernel/sub/sub_vm.c kernel/nt/ob.c kernel/nt/reg.c kernel/nt/io.c \
|
|
kernel/wait.c kernel/futex.c kernel/rcu.c kernel/ktest.c \
|
|
kernel/elf.c kernel/exec.c \
|
|
lib/string.c lib/vsprintf.c lib/bitmap.c lib/rbtree.c lib/kfifo.c lib/hashtable.c lib/font8x8.c \
|
|
init/cmdline.c init/service.c init/bootlogo.c init/logo_data.c usr/initramfs.c block/block.c block/elevator.c \
|
|
ipc/sem.c ipc/shm.c ipc/shm_posix.c ipc/pipe.c ipc/ipc.c ipc/msg.c \
|
|
crypto/sha256.c crypto/md5.c crypto/crc32.c crypto/prng.c sound/beep.c
|
|
|
|
# If no .config exists, default all core options to y
|
|
ifeq ($(wildcard .config),)
|
|
CONFIG_MM_PMM = y
|
|
CONFIG_MM_SLAB = y
|
|
CONFIG_MM_VMA = y
|
|
CONFIG_FS_VFS = y
|
|
CONFIG_FS_FAT32 = y
|
|
CONFIG_FS_EXT2 = y
|
|
CONFIG_FS_SYSFS = y
|
|
CONFIG_DRV_RAMDISK = y
|
|
CONFIG_DRV_AHCI = y
|
|
CONFIG_DRV_NVME = y
|
|
CONFIG_DRV_ATA = y
|
|
CONFIG_DRV_VIRTIO_BLK = y
|
|
CONFIG_NET_STACK = y
|
|
CONFIG_NET_FILTER = y
|
|
CONFIG_NET_HTTPD = y
|
|
CONFIG_NET_SSHD = y
|
|
CONFIG_DRV_E1000 = y
|
|
CONFIG_DRV_RTL8139 = y
|
|
CONFIG_DRV_VIRTIO_NET = y
|
|
CONFIG_DRV_PTY = y
|
|
CONFIG_DRV_VIRTIO_RNG = y
|
|
CONFIG_DRV_CANVAS_2D = y
|
|
CONFIG_DRV_BOCHS_VBE = y
|
|
CONFIG_DRV_SOUND_HDA = y
|
|
CONFIG_DRV_SOUND_AC97 = y
|
|
CONFIG_DRV_USB_XHCI = y
|
|
CONFIG_DRV_HWMON = y
|
|
CONFIG_SECURITY_LSM = y
|
|
CONFIG_SECURITY_KEYRING = y
|
|
CONFIG_BPF_VM = y
|
|
CONFIG_IO_URING = y
|
|
CONFIG_USERLAND_LAZYBOX = y
|
|
endif
|
|
|
|
CONFIG_SRCS-y := $(CORE_SRCS)
|
|
|
|
ifeq ($(CONFIG_MM_PMM), y)
|
|
CONFIG_SRCS-y += mm/pmm.c mm/kmalloc.c mm/page_cache.c
|
|
endif
|
|
ifeq ($(CONFIG_MM_SLAB), y)
|
|
CONFIG_SRCS-y += mm/slab.c
|
|
endif
|
|
ifeq ($(CONFIG_MM_VMA), y)
|
|
CONFIG_SRCS-y += mm/vma.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_BPF_VM), y)
|
|
CONFIG_SRCS-y += kernel/bpf.c
|
|
endif
|
|
ifeq ($(CONFIG_IO_URING), y)
|
|
CONFIG_SRCS-y += io_uring/io_uring.c
|
|
endif
|
|
ifeq ($(CONFIG_SECURITY_LSM), y)
|
|
CONFIG_SRCS-y += security/lsm.c security/auth.c
|
|
endif
|
|
ifeq ($(CONFIG_SECURITY_KEYRING), y)
|
|
CONFIG_SRCS-y += certs/x509.c
|
|
endif
|
|
|
|
# Filesystems
|
|
ifeq ($(CONFIG_FS_VFS), y)
|
|
CONFIG_SRCS-y += fs/vfs.c fs/ramfs.c fs/devfs.c fs/procfs.c
|
|
endif
|
|
ifeq ($(CONFIG_FS_FAT32), y)
|
|
CONFIG_SRCS-y += fs/fat32.c
|
|
endif
|
|
ifeq ($(CONFIG_FS_EXT2), y)
|
|
CONFIG_SRCS-y += fs/ext2.c
|
|
endif
|
|
ifeq ($(CONFIG_FS_SYSFS), y)
|
|
CONFIG_SRCS-y += fs/sysfs.c
|
|
endif
|
|
|
|
# Storage Drivers
|
|
ifeq ($(CONFIG_DRV_RAMDISK), y)
|
|
CONFIG_SRCS-y += drivers/block/ramdisk.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_AHCI), y)
|
|
CONFIG_SRCS-y += drivers/block/ahci.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_NVME), y)
|
|
CONFIG_SRCS-y += drivers/block/nvme.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_ATA), y)
|
|
CONFIG_SRCS-y += drivers/block/ata.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_VIRTIO_BLK), y)
|
|
CONFIG_SRCS-y += drivers/virtio/virtio_blk.c virt/virtio.c virt/hypervisor.c
|
|
endif
|
|
|
|
# Network Subsystem
|
|
ifeq ($(CONFIG_NET_STACK), y)
|
|
CONFIG_SRCS-y += net/core/net.c net/core/socket.c net/ipv4/tcp.c net/ipv4/udp.c net/ipv4/dhcp.c net/ipv4/dns.c net/ipv4/dns_cache.c
|
|
endif
|
|
ifeq ($(CONFIG_NET_FILTER), y)
|
|
CONFIG_SRCS-y += net/filter.c
|
|
endif
|
|
ifeq ($(CONFIG_NET_HTTPD), y)
|
|
CONFIG_SRCS-y += net/httpd.c
|
|
endif
|
|
ifeq ($(CONFIG_NET_SSHD), y)
|
|
CONFIG_SRCS-y += net/ssh.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_E1000), y)
|
|
CONFIG_SRCS-y += drivers/net/e1000.c drivers/pci/pci.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_RTL8139), y)
|
|
CONFIG_SRCS-y += drivers/net/rtl8139.c drivers/pci/pci.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_VIRTIO_NET), y)
|
|
CONFIG_SRCS-y += drivers/virtio/virtio_net.c virt/virtio.c
|
|
endif
|
|
|
|
# Character, Audio, Video Drivers
|
|
ifeq ($(CONFIG_DRV_PTY), y)
|
|
CONFIG_SRCS-y += drivers/char/pty.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_VIRTIO_RNG), y)
|
|
CONFIG_SRCS-y += drivers/char/virtio_rng.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_USB_XHCI), y)
|
|
CONFIG_SRCS-y += drivers/usb/xhci.c drivers/usb/usb.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_HWMON), y)
|
|
CONFIG_SRCS-y += drivers/hwmon/coretemp.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_CANVAS_2D), y)
|
|
CONFIG_SRCS-y += drivers/video/canvas.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_BOCHS_VBE), y)
|
|
CONFIG_SRCS-y += drivers/video/bochs.c drivers/video/fb.c drivers/video/fbcon.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_SOUND_HDA), y)
|
|
CONFIG_SRCS-y += sound/hda.c sound/sound.c sound/pcm.c sound/tts.c sound/melody.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_SOUND_AC97), y)
|
|
CONFIG_SRCS-y += sound/ac97.c sound/sound.c sound/pcm.c
|
|
endif
|
|
|
|
# Common Input/Display/Power/GPU/Networking Drivers
|
|
CONFIG_SRCS-y += drivers/char/tty.c drivers/char/keyboard.c drivers/char/serial.c drivers/char/vga.c \
|
|
drivers/input/mouse.c drivers/power/acpi.c drivers/power/cpufreq.c drivers/rtc/rtc.c drivers/sound/speaker.c \
|
|
drivers/net/e1000e.c drivers/virtio/virtio_gpu.c drivers/virtio/virtio_input.c \
|
|
drivers/timer/hpet.c drivers/char/lpt.c drivers/char/nvram.c
|
|
|
|
# Userland & GUI Desktop Subsystem
|
|
ifeq ($(CONFIG_USERLAND_LAZYBOX), y)
|
|
CONFIG_SRCS-y += userland/lazybox/lazybox.c userland/lazybox/shell.c userland/lazybox/sh.c userland/lazybox/nano.c userland/lazybox/snake.c userland/lazybox/tree.c userland/lazybox/coreutils.c
|
|
endif
|
|
|
|
CONFIG_SRCS-y += gui/gui.c gui/gui_gfx.c gui/gui_cursor.c gui/gui_wm.c gui/gui_desktop.c gui/gui_apps.c \
|
|
gui/gui_widgets.c gui/gui_icons.c gui/gui_dialog.c gui/gui_apps_ext.c gui/gui_terminal.c
|
|
|
|
# Deduplicate
|
|
CONFIG_SRCS-y := $(sort $(CONFIG_SRCS-y))
|
|
|
|
# Rust & C++ Layer Configuration
|
|
ifeq ($(ARCH), x86_64)
|
|
RUSTC ?= rustc
|
|
RUST_SRCS = $(shell find rust/src -name '*.rs' 2>/dev/null)
|
|
RUST_LIB = $(BUILD_DIR)/rust/librust_kernel.a
|
|
CXX ?= g++
|
|
CXXFLAGS = -ffreestanding -fno-pie -fno-pic -mno-red-zone -mno-mmx -mno-sse -mno-sse2 \
|
|
-mcmodel=kernel -Wall -Wextra -Wno-unused-function -Wno-unused-parameter \
|
|
$(if $(CONFIG_OPTIMIZATION),$(CONFIG_OPTIMIZATION),-O2) -Iinclude -D__x86_64__ \
|
|
-std=c++17 -fno-exceptions -fno-rtti -fno-threadsafe-statics -fno-use-cxa-atexit
|
|
CPP_SRCS = $(shell find kernel/cpp -name '*.cpp' 2>/dev/null)
|
|
CPP_OBJS = $(patsubst %.cpp, $(BUILD_DIR)/%.o, $(CPP_SRCS))
|
|
ALL_C_SRCS = $(ARCH_C_SRCS) $(CONFIG_SRCS-y)
|
|
C_OBJS = $(patsubst %.c, $(BUILD_DIR)/%.o, $(ALL_C_SRCS))
|
|
ASM_OBJS = $(patsubst %.asm, $(BUILD_DIR)/%.o, $(ARCH_ASM_SRCS))
|
|
|
|
# Userland /sbin/init, linked separately and carried inside the kernel image.
|
|
INIT_SRC = userland/init/init.c
|
|
INIT_LD = userland/init/user.ld
|
|
INIT_OBJ = $(BUILD_DIR)/userland/init/init.o
|
|
INIT_ELF = $(BUILD_DIR)/userland/init/init.elf
|
|
INIT_BLOB_SRC = $(BUILD_DIR)/usr/init_blob.c
|
|
INIT_BLOB_OBJ = $(BUILD_DIR)/usr/init_blob.o
|
|
|
|
OTHER_OBJS = $(filter-out $(ENTRY_OBJ), $(ASM_OBJS) $(C_OBJS)) $(CPP_OBJS) $(INIT_BLOB_OBJ) $(RUST_LIB)
|
|
else
|
|
CONFIG_SRCS-y += rust/rust_fallback.c kernel/cpp/cpp_fallback.c
|
|
ALL_C_SRCS = $(ARCH_C_SRCS) $(CONFIG_SRCS-y)
|
|
C_OBJS = $(patsubst %.c, $(BUILD_DIR)/%.o, $(ALL_C_SRCS))
|
|
S_OBJS = $(patsubst %.S, $(BUILD_DIR)/%.o, $(ARCH_S_SRCS))
|
|
OTHER_OBJS = $(filter-out $(ENTRY_OBJ), $(S_OBJS) $(C_OBJS))
|
|
endif
|
|
|
|
# Generated dependency files, one per object. The include lives at the very
|
|
# end of this file: a .d file's first rule would otherwise become make's
|
|
# default goal and turn a bare `make` into a no-op.
|
|
DEPS = $(C_OBJS:.o=.d) $(CPP_OBJS:.o=.d) $(S_OBJS:.o=.d)
|
|
|
|
.DEFAULT_GOAL := all
|
|
|
|
.PHONY: all clean run run-headless run-fullscreen run-vnc run-server debug info configure menuconfig config tui nconfig defconfig x86_64_defconfig aarch64_defconfig armv8_defconfig armv8i_defconfig armv81_defconfig arm32_defconfig qemu help
|
|
|
|
all: $(TARGET)
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Configuration Targets (Linux Kconfig TUI Configurator)
|
|
# -----------------------------------------------------------------------------
|
|
configure menuconfig config tui nconfig:
|
|
@python3 scripts/kconfig/menuconfig.py
|
|
|
|
defconfig:
|
|
@python3 scripts/kconfig/menuconfig.py --defconfig $(ARCH)
|
|
|
|
x86_64_defconfig:
|
|
@python3 scripts/kconfig/menuconfig.py --x86_64
|
|
|
|
aarch64_defconfig:
|
|
@python3 scripts/kconfig/menuconfig.py --aarch64
|
|
|
|
armv8_defconfig armv8i_defconfig armv81_defconfig arm32_defconfig:
|
|
@python3 scripts/kconfig/menuconfig.py --armv8i
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Compilation Rules
|
|
# -----------------------------------------------------------------------------
|
|
# Header dependency tracking: without this a header change leaves stale objects
|
|
# behind, and a struct layout edit silently corrupts every unrebuilt caller.
|
|
DEPFLAGS = -MMD -MP
|
|
|
|
# C Source Files
|
|
$(BUILD_DIR)/%.o: %.c include/config/autoconf.h
|
|
@mkdir -p $(dir $@)
|
|
$(CC) $(CFLAGS) $(DEPFLAGS) -c $< -o $@
|
|
|
|
# C++ Source Files
|
|
$(BUILD_DIR)/%.o: %.cpp include/config/autoconf.h
|
|
@mkdir -p $(dir $@)
|
|
$(CXX) $(CXXFLAGS) $(DEPFLAGS) -c $< -o $@
|
|
|
|
# x86_64 NASM Assembly Files
|
|
$(BUILD_DIR)/%.o: %.asm
|
|
@mkdir -p $(dir $@)
|
|
$(ASM) $(ASMFLAGS_ELF) $< -o $@
|
|
|
|
# ARM/AArch64 GNU Assembly Files (.S)
|
|
$(BUILD_DIR)/%.o: %.S
|
|
@mkdir -p $(dir $@)
|
|
$(CC) $(CFLAGS) $(DEPFLAGS) -c $< -o $@
|
|
|
|
# Userland Program Compilation
|
|
#
|
|
# /sbin/init is a separate freestanding executable, not kernel code: it is
|
|
# linked at the user base from userland/user.ld and must never see the kernel's
|
|
# -mcmodel=kernel, which cannot reach the user half of the address space.
|
|
USER_CFLAGS = -ffreestanding -nostdlib -fno-pie -fno-pic -mno-red-zone \
|
|
-mcmodel=large -mno-sse -mno-mmx -mno-sse2 \
|
|
-Wall -Wextra -Wno-unused-function \
|
|
$(if $(CONFIG_OPTIMIZATION),$(CONFIG_OPTIMIZATION),-O2)
|
|
|
|
$(INIT_OBJ): $(INIT_SRC)
|
|
@mkdir -p $(dir $@)
|
|
$(CC) $(USER_CFLAGS) -c $< -o $@
|
|
|
|
$(INIT_ELF): $(INIT_OBJ) $(INIT_LD)
|
|
@mkdir -p $(dir $@)
|
|
$(LD) -nostdlib -no-pie -T $(INIT_LD) -o $@ $(INIT_OBJ)
|
|
@echo "=== [Userland init linked: $@] ==="
|
|
|
|
$(INIT_BLOB_SRC): $(INIT_ELF) scripts/mkblob.py
|
|
@mkdir -p $(dir $@)
|
|
@python3 scripts/mkblob.py $(INIT_ELF) $@ subos_init_elf
|
|
|
|
$(INIT_BLOB_OBJ): $(INIT_BLOB_SRC) include/config/autoconf.h
|
|
@mkdir -p $(dir $@)
|
|
$(CC) $(CFLAGS) -c $< -o $@
|
|
|
|
# Rust Source Compilation
|
|
$(RUST_LIB): rust/src/lib.rs $(RUST_SRCS)
|
|
@mkdir -p $(dir $@)
|
|
$(RUSTC) --crate-type staticlib -C panic=abort -C relocation-model=static -C opt-level=2 -C no-redzone=y -o $@ rust/src/lib.rs
|
|
|
|
|
|
# Header Generation Fallback
|
|
include/config/autoconf.h:
|
|
@mkdir -p include/config
|
|
@if [ ! -f .config ]; then python3 scripts/kconfig/menuconfig.py --defconfig $(ARCH); fi
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Link & Image Assembly
|
|
# -----------------------------------------------------------------------------
|
|
$(BUILD_DIR)/boot/boot.bin: $(BOOT_DIR)/boot.asm | $(BUILD_DIR)/boot
|
|
$(ASM) $(ASMFLAGS_BOOT) $< -o $@
|
|
|
|
$(BUILD_DIR)/boot/stage2.bin: $(BOOT_DIR)/stage2.asm $(BOOT_DIR)/gdt.asm | $(BUILD_DIR)/boot
|
|
$(ASM) $(ASMFLAGS_BOOT) $< -o $@
|
|
|
|
$(BUILD_DIR)/boot:
|
|
mkdir -p $(BUILD_DIR)/boot
|
|
|
|
LIBGCC ?= $(shell $(CC) $(CFLAGS) -print-libgcc-file-name 2>/dev/null)
|
|
|
|
$(BUILD_DIR)/kernel.elf: $(ENTRY_OBJ) $(OTHER_OBJS)
|
|
$(LD) $(LDFLAGS) -o $@ $(ENTRY_OBJ) $(OTHER_OBJS) $(LIBGCC)
|
|
@echo "=== [Kernel ELF Linked: $@ (Architecture: $(ARCH))] ==="
|
|
|
|
$(BUILD_DIR)/kernel.bin: $(BUILD_DIR)/kernel.elf
|
|
$(OBJCOPY) -O binary $< $@
|
|
|
|
$(IMAGE): $(BUILD_DIR)/boot/boot.bin $(BUILD_DIR)/boot/stage2.bin $(BUILD_DIR)/kernel.bin
|
|
dd if=/dev/zero of=$@ bs=512 count=2880 status=none
|
|
dd if=$(BUILD_DIR)/boot/boot.bin of=$@ bs=512 conv=notrunc status=none
|
|
dd if=$(BUILD_DIR)/boot/stage2.bin of=$@ bs=512 seek=1 conv=notrunc status=none
|
|
dd if=$(BUILD_DIR)/kernel.bin of=$@ bs=512 seek=16 conv=notrunc status=none
|
|
@echo "=== [SUB-OS x86_64 Disk Image Built: $@ (Size: $$(du -h $@ | cut -f1))] ==="
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Execution & Emulation Targets
|
|
# -----------------------------------------------------------------------------
|
|
# -vga std gives the Bochs VBE adapter the kernel drives. vgamem_mb is raised
|
|
# because a 1280x720 32-bit framebuffer needs more than the 8 MB default.
|
|
QEMU_VGA = -device VGA,vgamem_mb=32
|
|
|
|
# `make run` boots straight into the SUB-OS Graphical Desktop Environment. The
|
|
# guest window scales with zoom-to-fit; pass `nogui`/`text` on the kernel
|
|
# command line for the emergency TTY. Use `make run-headless` for serial only.
|
|
run qemu: $(TARGET)
|
|
ifeq ($(ARCH), x86_64)
|
|
qemu-system-x86_64 -drive format=raw,file=$(IMAGE) -m 256M \
|
|
-netdev user,id=net0,hostfwd=tcp::2222-:22,hostfwd=tcp::8080-:80 \
|
|
-device e1000,netdev=net0 $(QEMU_VGA) -display gtk,zoom-to-fit=on -serial stdio
|
|
else ifneq ($(filter $(ARCH), aarch64 arm64),)
|
|
qemu-system-aarch64 -M virt -cpu cortex-a57 -m 256M -kernel $(BUILD_DIR)/kernel.elf -device virtio-gpu-pci -serial stdio
|
|
else
|
|
qemu-system-arm -M virt -cpu cortex-a15 -m 256M -kernel $(BUILD_DIR)/kernel.elf -device virtio-gpu-pci -serial stdio
|
|
endif
|
|
|
|
# Headless: no graphical window, kernel console on the serial line only. Boot
|
|
# with `nogui` on the kernel command line to reach the TTY in this mode.
|
|
run-headless: $(TARGET)
|
|
$(QEMU_CMD)
|
|
|
|
# Fullscreen without distortion: zoom-to-fit scales the guest while preserving
|
|
# its aspect ratio, letterboxing rather than stretching on a wider panel.
|
|
run-fullscreen: $(TARGET)
|
|
ifeq ($(ARCH), x86_64)
|
|
qemu-system-x86_64 -drive format=raw,file=$(IMAGE) \
|
|
-netdev user,id=net0,hostfwd=tcp::2222-:22,hostfwd=tcp::8080-:80 \
|
|
-device e1000,netdev=net0 $(QEMU_VGA) \
|
|
-display gtk,zoom-to-fit=on,show-cursor=on -full-screen -serial stdio
|
|
else
|
|
@echo "run-fullscreen targets x86_64 only"
|
|
endif
|
|
|
|
run-vnc: $(TARGET)
|
|
ifeq ($(ARCH), x86_64)
|
|
@echo "=== [QEMU VNC Server running at localhost:5900 (VNC Display :0)] ==="
|
|
qemu-system-x86_64 -drive format=raw,file=$(IMAGE) \
|
|
-netdev user,id=net0,hostfwd=tcp::2222-:22,hostfwd=tcp::8080-:80 \
|
|
-device e1000,netdev=net0 $(QEMU_VGA) -vnc :0 -serial stdio
|
|
else
|
|
@echo "=== [QEMU VNC Server running at localhost:5900 (VNC Display :0)] ==="
|
|
qemu-system-aarch64 -M virt -cpu cortex-a57 -m 128M -kernel $(BUILD_DIR)/kernel.elf -device virtio-gpu-pci -vnc :0 -serial stdio
|
|
endif
|
|
|
|
run-server: $(IMAGE)
|
|
qemu-system-x86_64 -drive format=raw,file=$(IMAGE) \
|
|
-netdev user,id=net0,hostfwd=tcp::2222-:22,hostfwd=tcp::8080-:80 \
|
|
-device e1000,netdev=net0 -serial stdio -display none
|
|
|
|
debug: $(TARGET)
|
|
ifeq ($(ARCH), x86_64)
|
|
qemu-system-x86_64 -drive format=raw,file=$(IMAGE) \
|
|
-netdev user,id=net0,hostfwd=tcp::2222-:22,hostfwd=tcp::8080-:80 \
|
|
-device e1000,netdev=net0 -serial stdio -s -S
|
|
else ifneq ($(filter $(ARCH), aarch64 arm64),)
|
|
qemu-system-aarch64 -M virt -cpu cortex-a57 -m 128M -nographic -kernel $(BUILD_DIR)/kernel.elf -s -S
|
|
else
|
|
qemu-system-arm -M virt -cpu cortex-a15 -m 128M -nographic -kernel $(BUILD_DIR)/kernel.elf -s -S
|
|
endif
|
|
|
|
info:
|
|
@echo "Target Architecture: $(ARCH)"
|
|
@echo "Cross Compiler: $(CROSS_COMPILE)"
|
|
@echo "Compiled Sources: $(words $(ALL_C_SRCS)) C files"
|
|
@echo "Target Binary: $(TARGET)"
|
|
|
|
help:
|
|
@echo "SUB-OS Kernel Build System (Linux-Style Kconfig)"
|
|
@echo "=================================================="
|
|
@echo " make configure - Launch interactive Linux-style TUI Configurator"
|
|
@echo " make menuconfig - Alias for make configure"
|
|
@echo " make defconfig - Reset to default configuration for active ARCH"
|
|
@echo " make x86_64_defconfig - Load x86_64 default configuration"
|
|
@echo " make aarch64_defconfig- Load AArch64 default configuration"
|
|
@echo " make armv8i_defconfig - Load ARMv8i (32-bit ARM) default configuration"
|
|
@echo " make all [ARCH=...] - Compile kernel image for selected architecture"
|
|
@echo " make run [ARCH=...] - Boot into the SUB-OS Graphical Desktop in QEMU"
|
|
@echo " make run-headless - Boot in QEMU with serial console only (no window)"
|
|
@echo " make run-fullscreen - Boot the desktop in a full-screen QEMU window"
|
|
@echo " make run-vnc - Boot the desktop and expose it over VNC :0"
|
|
@echo " make clean - Remove all compiled objects and disk images"
|
|
@echo " make info - Display build configuration and source metrics"
|
|
|
|
clean:
|
|
rm -rf $(BUILD_DIR) $(IMAGE)
|
|
|
|
-include $(DEPS)
|