mirror of
https://github.com/subhobhai943/SUB-OS.git
synced 2026-10-25 16:52:29 +00:00
subhobhai943andClaude Opus 5
56a378b142
Boot logo (init/bootlogo.c, init/logo_data.c, scripts/mklogo.py): The logo appears in two forms because the framebuffer does not exist for the first third of boot. An ASCII rendition goes to the text console and serial line from the first moments; once the video driver is up at step [5/14] the real bitmap takes over as a graphical splash with a progress bar tied to the actual boot stages. The asset is 4-bit palette indexed, so 160x160 pixels cost 12.5 KB instead of 100 KB, and carries a transparency mask so the mark composites onto the gradient rather than stamping a flat rectangle over it. scripts/mklogo.py regenerates init/logo_data.c from the source PNG. Boot reaches the desktop in well under a second, so the splash is held for a minimum duration and the bar sweeps to 100% during the hold; without that the logo would flash past unseen. `splashtime=<ms>` tunes it and `nosplash`, `nogui` or `text` skip it. Bootloader (boot/stage2.asm): stage2 staged the whole kernel in conventional RAM before copying it to 1 MB, which capped the kernel at roughly 576 KB before the load ran into video memory at 0xA0000. The logo pushed it over that line and the kernel stopped booting. Each 32 KB chunk now goes into one fixed low buffer and is copied straight to its final address, using unreal mode for the 32-bit reach. The ceiling is now the image itself, 1.375 MB. Console font (lib/font8x8.c): fb_draw_char was a stub that ignored its character argument and drew a filled rectangle, which is why the splash rendered its text as solid blocks. It now renders real glyphs, and the table it uses is shared: the framebuffer console, the canvas rasterizer and the desktop compositor had three divergent private copies, two of which still carried the `// \` line-continuation defect. printk console sink (kernel/printk.c): printk output can be redirected to a callback, so a caller can run a subsystem that reports via printk and capture what it printed. Serial and the dmesg ring still see everything, which keeps a captured run debuggable. Shell builtins (userland/lazybox/shell.c): The builtin chain is extracted into shell_execute_builtin(), so the kernel TTY and the desktop terminal accept the same vocabulary instead of the GUI seeing only the applet table. Callers that cannot be suspended pass allow_blocking = false to refuse the animating ones. Co-Authored-By: Claude Opus 5 <[email protected]> Claude-Session: https://claude.ai/code/session_01L5yKJT4Wo2cV3rfPrwY5MP
479 lines
18 KiB
Makefile
479 lines
18 KiB
Makefile
# =============================================================================
|
|
# SUB-OS Master Multi-Architecture Linux-Style Makefile
|
|
# Supports: x86_64, aarch64, armv8i
|
|
# Features: Linux Kconfig TUI (make configure / make menuconfig), dynamic Kbuild
|
|
# =============================================================================
|
|
|
|
-include .config
|
|
|
|
# Architecture Selection (Default: x86_64)
|
|
ifdef CONFIG_ARCH
|
|
ARCH ?= $(CONFIG_ARCH)
|
|
else
|
|
ARCH ?= x86_64
|
|
endif
|
|
|
|
BUILD_DIR = build
|
|
BOOT_DIR = boot
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Toolchain & Architecture Flags
|
|
# -----------------------------------------------------------------------------
|
|
ifeq ($(ARCH), x86_64)
|
|
CROSS_COMPILE ?= x86_64-elf-
|
|
CC = $(CROSS_COMPILE)gcc
|
|
LD = $(CROSS_COMPILE)ld
|
|
OBJCOPY = $(CROSS_COMPILE)objcopy
|
|
ASM = nasm
|
|
|
|
CFLAGS = -ffreestanding \
|
|
-fno-pie \
|
|
-fno-pic \
|
|
-mno-red-zone \
|
|
-mno-mmx \
|
|
-mno-sse \
|
|
-mno-sse2 \
|
|
-mcmodel=kernel \
|
|
-Wall \
|
|
-Wextra \
|
|
-Wno-unused-function \
|
|
-Wno-unused-parameter \
|
|
$(if $(CONFIG_OPTIMIZATION),$(CONFIG_OPTIMIZATION),-O2) \
|
|
-Iinclude \
|
|
-D__x86_64__
|
|
|
|
ASMFLAGS_ELF = -f elf64
|
|
ASMFLAGS_BOOT = -f bin -I$(BOOT_DIR)/
|
|
LDFLAGS = -nostdlib -no-pie -T linker.ld
|
|
|
|
ARCH_C_SRCS = $(shell find arch/x86_64 -name '*.c' 2>/dev/null)
|
|
ARCH_ASM_SRCS = $(shell find arch/x86_64 -name '*.asm' 2>/dev/null)
|
|
ENTRY_OBJ = $(BUILD_DIR)/arch/x86_64/boot/entry.o
|
|
IMAGE = SUB-OS.img
|
|
TARGET = $(IMAGE)
|
|
QEMU_CMD = qemu-system-x86_64 -drive format=raw,file=$(IMAGE) \
|
|
-netdev user,id=net0,hostfwd=tcp::2222-:22,hostfwd=tcp::8080-:80 \
|
|
-device e1000,netdev=net0 -serial stdio -display none
|
|
|
|
else ifneq ($(filter $(ARCH), aarch64 arm64),)
|
|
CROSS_COMPILE ?= aarch64-linux-gnu-
|
|
CC = $(CROSS_COMPILE)gcc
|
|
LD = $(CROSS_COMPILE)ld
|
|
OBJCOPY = $(CROSS_COMPILE)objcopy
|
|
AS = $(CROSS_COMPILE)as
|
|
|
|
CFLAGS = -ffreestanding \
|
|
-fno-pie \
|
|
-fno-pic \
|
|
-Wall \
|
|
-Wextra \
|
|
-Wno-unused-function \
|
|
-Wno-unused-parameter \
|
|
-mno-outline-atomics \
|
|
$(if $(CONFIG_OPTIMIZATION),$(CONFIG_OPTIMIZATION),-O2) \
|
|
-Iinclude \
|
|
-D__aarch64__ \
|
|
-march=armv8-a
|
|
|
|
LDFLAGS = -nostdlib -no-pie -T arch/aarch64/linker.ld
|
|
|
|
ARCH_C_SRCS = $(shell find arch/aarch64 -name '*.c' 2>/dev/null)
|
|
ARCH_S_SRCS = $(shell find arch/aarch64 -name '*.S' 2>/dev/null)
|
|
ENTRY_OBJ = $(BUILD_DIR)/arch/aarch64/boot/entry.o
|
|
TARGET = $(BUILD_DIR)/kernel.elf
|
|
QEMU_CMD = qemu-system-aarch64 -M virt -cpu cortex-a57 -m 128M -nographic -kernel $(BUILD_DIR)/kernel.elf
|
|
|
|
else ifneq ($(filter $(ARCH), armv8i armv81 arm32 arm armv7 armv7-a armv7a aarch32),)
|
|
CROSS_COMPILE ?= arm-linux-gnueabihf-
|
|
CC = $(CROSS_COMPILE)gcc
|
|
LD = $(CROSS_COMPILE)ld
|
|
OBJCOPY = $(CROSS_COMPILE)objcopy
|
|
AS = $(CROSS_COMPILE)as
|
|
|
|
CFLAGS = -ffreestanding \
|
|
-fno-pie \
|
|
-fno-pic \
|
|
-Wall \
|
|
-Wextra \
|
|
-Wno-unused-function \
|
|
-Wno-unused-parameter \
|
|
$(if $(CONFIG_OPTIMIZATION),$(CONFIG_OPTIMIZATION),-O2) \
|
|
-Iinclude \
|
|
-D__arm__ \
|
|
-D__armv8i__ \
|
|
-mcpu=cortex-a15 \
|
|
-mfpu=neon-vfpv4 \
|
|
-mfloat-abi=hard \
|
|
-marm
|
|
|
|
LDFLAGS = -nostdlib -no-pie -T arch/armv8i/linker.ld
|
|
|
|
ARCH_C_SRCS = $(shell find arch/armv8i -name '*.c' 2>/dev/null)
|
|
ARCH_S_SRCS = $(shell find arch/armv8i -name '*.S' 2>/dev/null)
|
|
ENTRY_OBJ = $(BUILD_DIR)/arch/armv8i/boot/entry.o
|
|
TARGET = $(BUILD_DIR)/kernel.elf
|
|
QEMU_CMD = qemu-system-arm -M virt -cpu cortex-a15 -m 128M -nographic -kernel $(BUILD_DIR)/kernel.elf
|
|
|
|
else
|
|
$(error Unsupported Architecture '$(ARCH)'. Supported: x86_64, aarch64, armv8i)
|
|
endif
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Linux-Style Configurable Kernel Subsystems (Kbuild-Style)
|
|
# -----------------------------------------------------------------------------
|
|
CORE_SRCS = kernel/main.c kernel/task.c kernel/sync.c kernel/timer.c kernel/printk.c \
|
|
kernel/panic.c kernel/trace.c kernel/sched.c kernel/cron.c kernel/syscall.c \
|
|
kernel/syslog.c kernel/module.c kernel/kobject.c kernel/metrics.c kernel/namespace.c \
|
|
kernel/signal.c kernel/workqueue.c kernel/tsc.c kernel/vt_art.c \
|
|
kernel/sub/sub_runtime.c kernel/sub/sub_vm.c \
|
|
kernel/wait.c kernel/futex.c kernel/rcu.c kernel/ktest.c \
|
|
lib/string.c lib/vsprintf.c lib/bitmap.c lib/rbtree.c lib/kfifo.c lib/hashtable.c lib/font8x8.c \
|
|
init/cmdline.c init/service.c init/bootlogo.c init/logo_data.c usr/initramfs.c block/block.c block/elevator.c \
|
|
ipc/sem.c ipc/shm.c ipc/shm_posix.c ipc/pipe.c ipc/ipc.c ipc/msg.c \
|
|
crypto/sha256.c crypto/md5.c crypto/crc32.c crypto/prng.c sound/beep.c
|
|
|
|
# If no .config exists, default all core options to y
|
|
ifeq ($(wildcard .config),)
|
|
CONFIG_MM_PMM = y
|
|
CONFIG_MM_SLAB = y
|
|
CONFIG_MM_VMA = y
|
|
CONFIG_FS_VFS = y
|
|
CONFIG_FS_FAT32 = y
|
|
CONFIG_FS_EXT2 = y
|
|
CONFIG_FS_SYSFS = y
|
|
CONFIG_DRV_RAMDISK = y
|
|
CONFIG_DRV_AHCI = y
|
|
CONFIG_DRV_NVME = y
|
|
CONFIG_DRV_ATA = y
|
|
CONFIG_DRV_VIRTIO_BLK = y
|
|
CONFIG_NET_STACK = y
|
|
CONFIG_NET_FILTER = y
|
|
CONFIG_NET_HTTPD = y
|
|
CONFIG_NET_SSHD = y
|
|
CONFIG_DRV_E1000 = y
|
|
CONFIG_DRV_RTL8139 = y
|
|
CONFIG_DRV_VIRTIO_NET = y
|
|
CONFIG_DRV_PTY = y
|
|
CONFIG_DRV_VIRTIO_RNG = y
|
|
CONFIG_DRV_CANVAS_2D = y
|
|
CONFIG_DRV_BOCHS_VBE = y
|
|
CONFIG_DRV_SOUND_HDA = y
|
|
CONFIG_DRV_SOUND_AC97 = y
|
|
CONFIG_DRV_USB_XHCI = y
|
|
CONFIG_DRV_HWMON = y
|
|
CONFIG_SECURITY_LSM = y
|
|
CONFIG_SECURITY_KEYRING = y
|
|
CONFIG_BPF_VM = y
|
|
CONFIG_IO_URING = y
|
|
CONFIG_USERLAND_LAZYBOX = y
|
|
endif
|
|
|
|
CONFIG_SRCS-y := $(CORE_SRCS)
|
|
|
|
ifeq ($(CONFIG_MM_PMM), y)
|
|
CONFIG_SRCS-y += mm/pmm.c mm/kmalloc.c mm/page_cache.c
|
|
endif
|
|
ifeq ($(CONFIG_MM_SLAB), y)
|
|
CONFIG_SRCS-y += mm/slab.c
|
|
endif
|
|
ifeq ($(CONFIG_MM_VMA), y)
|
|
CONFIG_SRCS-y += mm/vma.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_BPF_VM), y)
|
|
CONFIG_SRCS-y += kernel/bpf.c
|
|
endif
|
|
ifeq ($(CONFIG_IO_URING), y)
|
|
CONFIG_SRCS-y += io_uring/io_uring.c
|
|
endif
|
|
ifeq ($(CONFIG_SECURITY_LSM), y)
|
|
CONFIG_SRCS-y += security/lsm.c security/auth.c
|
|
endif
|
|
ifeq ($(CONFIG_SECURITY_KEYRING), y)
|
|
CONFIG_SRCS-y += certs/x509.c
|
|
endif
|
|
|
|
# Filesystems
|
|
ifeq ($(CONFIG_FS_VFS), y)
|
|
CONFIG_SRCS-y += fs/vfs.c fs/ramfs.c fs/devfs.c fs/procfs.c
|
|
endif
|
|
ifeq ($(CONFIG_FS_FAT32), y)
|
|
CONFIG_SRCS-y += fs/fat32.c
|
|
endif
|
|
ifeq ($(CONFIG_FS_EXT2), y)
|
|
CONFIG_SRCS-y += fs/ext2.c
|
|
endif
|
|
ifeq ($(CONFIG_FS_SYSFS), y)
|
|
CONFIG_SRCS-y += fs/sysfs.c
|
|
endif
|
|
|
|
# Storage Drivers
|
|
ifeq ($(CONFIG_DRV_RAMDISK), y)
|
|
CONFIG_SRCS-y += drivers/block/ramdisk.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_AHCI), y)
|
|
CONFIG_SRCS-y += drivers/block/ahci.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_NVME), y)
|
|
CONFIG_SRCS-y += drivers/block/nvme.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_ATA), y)
|
|
CONFIG_SRCS-y += drivers/block/ata.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_VIRTIO_BLK), y)
|
|
CONFIG_SRCS-y += drivers/virtio/virtio_blk.c virt/virtio.c virt/hypervisor.c
|
|
endif
|
|
|
|
# Network Subsystem
|
|
ifeq ($(CONFIG_NET_STACK), y)
|
|
CONFIG_SRCS-y += net/core/net.c net/core/socket.c net/ipv4/tcp.c net/ipv4/udp.c net/ipv4/dhcp.c net/ipv4/dns.c net/ipv4/dns_cache.c
|
|
endif
|
|
ifeq ($(CONFIG_NET_FILTER), y)
|
|
CONFIG_SRCS-y += net/filter.c
|
|
endif
|
|
ifeq ($(CONFIG_NET_HTTPD), y)
|
|
CONFIG_SRCS-y += net/httpd.c
|
|
endif
|
|
ifeq ($(CONFIG_NET_SSHD), y)
|
|
CONFIG_SRCS-y += net/ssh.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_E1000), y)
|
|
CONFIG_SRCS-y += drivers/net/e1000.c drivers/pci/pci.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_RTL8139), y)
|
|
CONFIG_SRCS-y += drivers/net/rtl8139.c drivers/pci/pci.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_VIRTIO_NET), y)
|
|
CONFIG_SRCS-y += drivers/virtio/virtio_net.c virt/virtio.c
|
|
endif
|
|
|
|
# Character, Audio, Video Drivers
|
|
ifeq ($(CONFIG_DRV_PTY), y)
|
|
CONFIG_SRCS-y += drivers/char/pty.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_VIRTIO_RNG), y)
|
|
CONFIG_SRCS-y += drivers/char/virtio_rng.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_USB_XHCI), y)
|
|
CONFIG_SRCS-y += drivers/usb/xhci.c drivers/usb/usb.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_HWMON), y)
|
|
CONFIG_SRCS-y += drivers/hwmon/coretemp.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_CANVAS_2D), y)
|
|
CONFIG_SRCS-y += drivers/video/canvas.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_BOCHS_VBE), y)
|
|
CONFIG_SRCS-y += drivers/video/bochs.c drivers/video/fb.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_SOUND_HDA), y)
|
|
CONFIG_SRCS-y += sound/hda.c sound/sound.c sound/pcm.c sound/tts.c sound/melody.c
|
|
endif
|
|
ifeq ($(CONFIG_DRV_SOUND_AC97), y)
|
|
CONFIG_SRCS-y += sound/ac97.c sound/sound.c sound/pcm.c
|
|
endif
|
|
|
|
# Common Input/Display/Power/GPU/Networking Drivers
|
|
CONFIG_SRCS-y += drivers/char/tty.c drivers/char/keyboard.c drivers/char/serial.c drivers/char/vga.c \
|
|
drivers/input/mouse.c drivers/power/acpi.c drivers/power/cpufreq.c drivers/rtc/rtc.c drivers/sound/speaker.c \
|
|
drivers/net/e1000e.c drivers/virtio/virtio_gpu.c drivers/virtio/virtio_input.c
|
|
|
|
# Userland & GUI Desktop Subsystem
|
|
ifeq ($(CONFIG_USERLAND_LAZYBOX), y)
|
|
CONFIG_SRCS-y += userland/lazybox/lazybox.c userland/lazybox/shell.c userland/lazybox/sh.c userland/lazybox/nano.c userland/lazybox/snake.c userland/lazybox/tree.c userland/lazybox/coreutils.c
|
|
endif
|
|
|
|
CONFIG_SRCS-y += gui/gui.c gui/gui_gfx.c gui/gui_cursor.c gui/gui_wm.c gui/gui_desktop.c gui/gui_apps.c \
|
|
gui/gui_widgets.c gui/gui_icons.c gui/gui_dialog.c gui/gui_apps_ext.c gui/gui_terminal.c
|
|
|
|
# Deduplicate
|
|
CONFIG_SRCS-y := $(sort $(CONFIG_SRCS-y))
|
|
|
|
# Rust & C++ Layer Configuration
|
|
ifeq ($(ARCH), x86_64)
|
|
RUSTC ?= rustc
|
|
RUST_SRCS = $(shell find rust/src -name '*.rs' 2>/dev/null)
|
|
RUST_LIB = $(BUILD_DIR)/rust/librust_kernel.a
|
|
CXX ?= g++
|
|
CXXFLAGS = -ffreestanding -fno-pie -fno-pic -mno-red-zone -mno-mmx -mno-sse -mno-sse2 \
|
|
-mcmodel=kernel -Wall -Wextra -Wno-unused-function -Wno-unused-parameter \
|
|
$(if $(CONFIG_OPTIMIZATION),$(CONFIG_OPTIMIZATION),-O2) -Iinclude -D__x86_64__ \
|
|
-std=c++17 -fno-exceptions -fno-rtti -fno-threadsafe-statics -fno-use-cxa-atexit
|
|
CPP_SRCS = $(shell find kernel/cpp -name '*.cpp' 2>/dev/null)
|
|
CPP_OBJS = $(patsubst %.cpp, $(BUILD_DIR)/%.o, $(CPP_SRCS))
|
|
ALL_C_SRCS = $(ARCH_C_SRCS) $(CONFIG_SRCS-y)
|
|
C_OBJS = $(patsubst %.c, $(BUILD_DIR)/%.o, $(ALL_C_SRCS))
|
|
ASM_OBJS = $(patsubst %.asm, $(BUILD_DIR)/%.o, $(ARCH_ASM_SRCS))
|
|
OTHER_OBJS = $(filter-out $(ENTRY_OBJ), $(ASM_OBJS) $(C_OBJS)) $(CPP_OBJS) $(RUST_LIB)
|
|
else
|
|
CONFIG_SRCS-y += rust/rust_fallback.c kernel/cpp/cpp_fallback.c
|
|
ALL_C_SRCS = $(ARCH_C_SRCS) $(CONFIG_SRCS-y)
|
|
C_OBJS = $(patsubst %.c, $(BUILD_DIR)/%.o, $(ALL_C_SRCS))
|
|
S_OBJS = $(patsubst %.S, $(BUILD_DIR)/%.o, $(ARCH_S_SRCS))
|
|
OTHER_OBJS = $(filter-out $(ENTRY_OBJ), $(S_OBJS) $(C_OBJS))
|
|
endif
|
|
|
|
# Generated dependency files, one per object. The include lives at the very
|
|
# end of this file: a .d file's first rule would otherwise become make's
|
|
# default goal and turn a bare `make` into a no-op.
|
|
DEPS = $(C_OBJS:.o=.d) $(CPP_OBJS:.o=.d) $(S_OBJS:.o=.d)
|
|
|
|
.DEFAULT_GOAL := all
|
|
|
|
.PHONY: all clean run debug info configure menuconfig config tui nconfig defconfig x86_64_defconfig aarch64_defconfig armv8_defconfig armv8i_defconfig armv81_defconfig arm32_defconfig qemu help
|
|
|
|
all: $(TARGET)
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Configuration Targets (Linux Kconfig TUI Configurator)
|
|
# -----------------------------------------------------------------------------
|
|
configure menuconfig config tui nconfig:
|
|
@python3 scripts/kconfig/menuconfig.py
|
|
|
|
defconfig:
|
|
@python3 scripts/kconfig/menuconfig.py --defconfig $(ARCH)
|
|
|
|
x86_64_defconfig:
|
|
@python3 scripts/kconfig/menuconfig.py --x86_64
|
|
|
|
aarch64_defconfig:
|
|
@python3 scripts/kconfig/menuconfig.py --aarch64
|
|
|
|
armv8_defconfig armv8i_defconfig armv81_defconfig arm32_defconfig:
|
|
@python3 scripts/kconfig/menuconfig.py --armv8i
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Compilation Rules
|
|
# -----------------------------------------------------------------------------
|
|
# Header dependency tracking: without this a header change leaves stale objects
|
|
# behind, and a struct layout edit silently corrupts every unrebuilt caller.
|
|
DEPFLAGS = -MMD -MP
|
|
|
|
# C Source Files
|
|
$(BUILD_DIR)/%.o: %.c include/config/autoconf.h
|
|
@mkdir -p $(dir $@)
|
|
$(CC) $(CFLAGS) $(DEPFLAGS) -c $< -o $@
|
|
|
|
# C++ Source Files
|
|
$(BUILD_DIR)/%.o: %.cpp include/config/autoconf.h
|
|
@mkdir -p $(dir $@)
|
|
$(CXX) $(CXXFLAGS) $(DEPFLAGS) -c $< -o $@
|
|
|
|
# x86_64 NASM Assembly Files
|
|
$(BUILD_DIR)/%.o: %.asm
|
|
@mkdir -p $(dir $@)
|
|
$(ASM) $(ASMFLAGS_ELF) $< -o $@
|
|
|
|
# ARM/AArch64 GNU Assembly Files (.S)
|
|
$(BUILD_DIR)/%.o: %.S
|
|
@mkdir -p $(dir $@)
|
|
$(CC) $(CFLAGS) $(DEPFLAGS) -c $< -o $@
|
|
|
|
# Rust Source Compilation
|
|
$(RUST_LIB): rust/src/lib.rs $(RUST_SRCS)
|
|
@mkdir -p $(dir $@)
|
|
$(RUSTC) --crate-type staticlib -C panic=abort -C relocation-model=static -C opt-level=2 -C no-redzone=y -o $@ rust/src/lib.rs
|
|
|
|
|
|
# Header Generation Fallback
|
|
include/config/autoconf.h:
|
|
@mkdir -p include/config
|
|
@if [ ! -f .config ]; then python3 scripts/kconfig/menuconfig.py --defconfig $(ARCH); fi
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Link & Image Assembly
|
|
# -----------------------------------------------------------------------------
|
|
$(BUILD_DIR)/boot/boot.bin: $(BOOT_DIR)/boot.asm | $(BUILD_DIR)/boot
|
|
$(ASM) $(ASMFLAGS_BOOT) $< -o $@
|
|
|
|
$(BUILD_DIR)/boot/stage2.bin: $(BOOT_DIR)/stage2.asm $(BOOT_DIR)/gdt.asm | $(BUILD_DIR)/boot
|
|
$(ASM) $(ASMFLAGS_BOOT) $< -o $@
|
|
|
|
$(BUILD_DIR)/boot:
|
|
mkdir -p $(BUILD_DIR)/boot
|
|
|
|
LIBGCC ?= $(shell $(CC) $(CFLAGS) -print-libgcc-file-name 2>/dev/null)
|
|
|
|
$(BUILD_DIR)/kernel.elf: $(ENTRY_OBJ) $(OTHER_OBJS)
|
|
$(LD) $(LDFLAGS) -o $@ $(ENTRY_OBJ) $(OTHER_OBJS) $(LIBGCC)
|
|
@echo "=== [Kernel ELF Linked: $@ (Architecture: $(ARCH))] ==="
|
|
|
|
$(BUILD_DIR)/kernel.bin: $(BUILD_DIR)/kernel.elf
|
|
$(OBJCOPY) -O binary $< $@
|
|
|
|
$(IMAGE): $(BUILD_DIR)/boot/boot.bin $(BUILD_DIR)/boot/stage2.bin $(BUILD_DIR)/kernel.bin
|
|
dd if=/dev/zero of=$@ bs=512 count=2880 status=none
|
|
dd if=$(BUILD_DIR)/boot/boot.bin of=$@ bs=512 conv=notrunc status=none
|
|
dd if=$(BUILD_DIR)/boot/stage2.bin of=$@ bs=512 seek=1 conv=notrunc status=none
|
|
dd if=$(BUILD_DIR)/kernel.bin of=$@ bs=512 seek=16 conv=notrunc status=none
|
|
@echo "=== [SUB-OS x86_64 Disk Image Built: $@ (Size: $$(du -h $@ | cut -f1))] ==="
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Execution & Emulation Targets
|
|
# -----------------------------------------------------------------------------
|
|
run qemu: $(TARGET)
|
|
$(QEMU_CMD)
|
|
|
|
run-gui: $(TARGET)
|
|
ifeq ($(ARCH), x86_64)
|
|
qemu-system-x86_64 -drive format=raw,file=$(IMAGE) \
|
|
-netdev user,id=net0,hostfwd=tcp::2222-:22,hostfwd=tcp::8080-:80 \
|
|
-device e1000,netdev=net0 -vga std -serial stdio
|
|
else ifneq ($(filter $(ARCH), aarch64 arm64),)
|
|
qemu-system-aarch64 -M virt -cpu cortex-a57 -m 128M -kernel $(BUILD_DIR)/kernel.elf -device virtio-gpu-pci -serial stdio
|
|
else
|
|
qemu-system-arm -M virt -cpu cortex-a15 -m 128M -kernel $(BUILD_DIR)/kernel.elf -device virtio-gpu-pci -serial stdio
|
|
endif
|
|
|
|
run-vnc: $(TARGET)
|
|
ifeq ($(ARCH), x86_64)
|
|
@echo "=== [QEMU VNC Server running at localhost:5900 (VNC Display :0)] ==="
|
|
qemu-system-x86_64 -drive format=raw,file=$(IMAGE) \
|
|
-netdev user,id=net0,hostfwd=tcp::2222-:22,hostfwd=tcp::8080-:80 \
|
|
-device e1000,netdev=net0 -vga std -vnc :0 -serial stdio
|
|
else
|
|
@echo "=== [QEMU VNC Server running at localhost:5900 (VNC Display :0)] ==="
|
|
qemu-system-aarch64 -M virt -cpu cortex-a57 -m 128M -kernel $(BUILD_DIR)/kernel.elf -device virtio-gpu-pci -vnc :0 -serial stdio
|
|
endif
|
|
|
|
run-server: $(IMAGE)
|
|
qemu-system-x86_64 -drive format=raw,file=$(IMAGE) \
|
|
-netdev user,id=net0,hostfwd=tcp::2222-:22,hostfwd=tcp::8080-:80 \
|
|
-device e1000,netdev=net0 -serial stdio -display none
|
|
|
|
debug: $(TARGET)
|
|
ifeq ($(ARCH), x86_64)
|
|
qemu-system-x86_64 -drive format=raw,file=$(IMAGE) \
|
|
-netdev user,id=net0,hostfwd=tcp::2222-:22,hostfwd=tcp::8080-:80 \
|
|
-device e1000,netdev=net0 -serial stdio -s -S
|
|
else ifneq ($(filter $(ARCH), aarch64 arm64),)
|
|
qemu-system-aarch64 -M virt -cpu cortex-a57 -m 128M -nographic -kernel $(BUILD_DIR)/kernel.elf -s -S
|
|
else
|
|
qemu-system-arm -M virt -cpu cortex-a15 -m 128M -nographic -kernel $(BUILD_DIR)/kernel.elf -s -S
|
|
endif
|
|
|
|
info:
|
|
@echo "Target Architecture: $(ARCH)"
|
|
@echo "Cross Compiler: $(CROSS_COMPILE)"
|
|
@echo "Compiled Sources: $(words $(ALL_C_SRCS)) C files"
|
|
@echo "Target Binary: $(TARGET)"
|
|
|
|
help:
|
|
@echo "SUB-OS Kernel Build System (Linux-Style Kconfig)"
|
|
@echo "=================================================="
|
|
@echo " make configure - Launch interactive Linux-style TUI Configurator"
|
|
@echo " make menuconfig - Alias for make configure"
|
|
@echo " make defconfig - Reset to default configuration for active ARCH"
|
|
@echo " make x86_64_defconfig - Load x86_64 default configuration"
|
|
@echo " make aarch64_defconfig- Load AArch64 default configuration"
|
|
@echo " make armv8i_defconfig - Load ARMv8i (32-bit ARM) default configuration"
|
|
@echo " make all [ARCH=...] - Compile kernel image for selected architecture"
|
|
@echo " make qemu [ARCH=...] - Boot the compiled kernel in QEMU emulator"
|
|
@echo " make clean - Remove all compiled objects and disk images"
|
|
@echo " make info - Display build configuration and source metrics"
|
|
|
|
clean:
|
|
rm -rf $(BUILD_DIR) $(IMAGE)
|
|
|
|
-include $(DEPS)
|