Files
SUB-OS/kernel/main.c
T
subhobhai943andClaude Opus 5 ba06264d12 feat(boot): Add SUB-OS boot logo and splash, share the console font, and lift the kernel size ceiling
Boot logo (init/bootlogo.c, init/logo_data.c, scripts/mklogo.py):
  The logo appears in two forms because the framebuffer does not exist for the
  first third of boot. An ASCII rendition goes to the text console and serial
  line from the first moments; once the video driver is up at step [5/14] the
  real bitmap takes over as a graphical splash with a progress bar tied to the
  actual boot stages.

  The asset is 4-bit palette indexed, so 160x160 pixels cost 12.5 KB instead of
  100 KB, and carries a transparency mask so the mark composites onto the
  gradient rather than stamping a flat rectangle over it. scripts/mklogo.py
  regenerates init/logo_data.c from the source PNG.

  Boot reaches the desktop in well under a second, so the splash is held for a
  minimum duration and the bar sweeps to 100% during the hold; without that the
  logo would flash past unseen. `splashtime=<ms>` tunes it and `nosplash`,
  `nogui` or `text` skip it.

Bootloader (boot/stage2.asm):
  stage2 staged the whole kernel in conventional RAM before copying it to 1 MB,
  which capped the kernel at roughly 576 KB before the load ran into video
  memory at 0xA0000. The logo pushed it over that line and the kernel stopped
  booting. Each 32 KB chunk now goes into one fixed low buffer and is copied
  straight to its final address, using unreal mode for the 32-bit reach. The
  ceiling is now the image itself, 1.375 MB.

Console font (lib/font8x8.c):
  fb_draw_char was a stub that ignored its character argument and drew a filled
  rectangle, which is why the splash rendered its text as solid blocks. It now
  renders real glyphs, and the table it uses is shared: the framebuffer console,
  the canvas rasterizer and the desktop compositor had three divergent private
  copies, two of which still carried the `// \` line-continuation defect.

printk console sink (kernel/printk.c):
  printk output can be redirected to a callback, so a caller can run a subsystem
  that reports via printk and capture what it printed. Serial and the dmesg ring
  still see everything, which keeps a captured run debuggable.

Shell builtins (userland/lazybox/shell.c):
  The builtin chain is extracted into shell_execute_builtin(), so the kernel TTY
  and the desktop terminal accept the same vocabulary instead of the GUI seeing
  only the applet table. Callers that cannot be suspended pass allow_blocking =
  false to refuse the animating ones.

Co-Authored-By: Claude Opus 5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01L5yKJT4Wo2cV3rfPrwY5MP
2026-08-25 01:37:20 +05:30

345 lines
10 KiB
C

#include <kernel/kernel.h>
#include <kernel/printk.h>
#include <kernel/sched.h>
#include <kernel/task.h>
#include <kernel/signal.h>
#include <kernel/syscall.h>
#include <kernel/timer.h>
#include <kernel/workqueue.h>
#include <kernel/module.h>
#include <kernel/trace.h>
#include <kernel/namespace.h>
#include <kernel/syslog.h>
#include <kernel/cron.h>
#include <kernel/metrics.h>
#include <kernel/bpf.h>
#include <kernel/kobject.h>
#include <kernel/wait.h>
#include <kernel/futex.h>
#include <kernel/rcu.h>
#include <kernel/ktest.h>
#include <mm/page_cache.h>
#include <mm/vma.h>
#include <drivers/canvas.h>
#include <drivers/pty.h>
#include <arch/arch.h>
#include <mm/pmm.h>
#include <mm/kmalloc.h>
#include <mm/slab.h>
#include <drivers/tty.h>
#include <drivers/serial.h>
#include <drivers/keyboard.h>
#include <drivers/mouse.h>
#include <drivers/ata.h>
#include <drivers/ahci.h>
#include <drivers/nvme.h>
#include <drivers/bochs.h>
#include <drivers/virtio_blk.h>
#include <drivers/virtio_net.h>
#include <drivers/virtio_rng.h>
#include <drivers/hwmon.h>
#include <drivers/pci.h>
#include <drivers/e1000.h>
#include <drivers/rtl8139.h>
#include <drivers/speaker.h>
#include <drivers/fb.h>
#include <drivers/rtc.h>
#include <drivers/acpi.h>
#include <drivers/usb.h>
#include <drivers/xhci.h>
#include <drivers/ramdisk.h>
#include <block/block.h>
#include <ipc/ipc.h>
#include <sound/sound.h>
#include <sound/hda.h>
#include <sound/melody.h>
#include <fs/vfs.h>
#include <fs/fat32.h>
#include <fs/ext2.h>
#include <fs/sysfs.h>
#include <net/net.h>
#include <net/socket.h>
#include <net/udp.h>
#include <net/tcp.h>
#include <net/dhcp.h>
#include <net/dns.h>
#include <net/dns_cache.h>
#include <ipc/shm_posix.h>
#include <sound/beep.h>
#include <kernel/tsc.h>
#include <drivers/e1000e.h>
#include <drivers/virtio_gpu.h>
#include <drivers/cpufreq.h>
#include <drivers/virtio_input.h>
#include <kernel/rust.h>
#include <kernel/sub_lang.h>
#include <kernel/cpp_kernel.h>
#include <net/filter.h>
#include <net/http.h>
#include <net/ssh.h>
#include <crypto/crypto.h>
#include <certs/certs.h>
#include <security/security.h>
#include <security/auth.h>
#include <io_uring/io_uring.h>
#include <usr/initramfs.h>
#include <virt/virt.h>
#include <init/init.h>
#include <init/service.h>
#include <init/version.h>
#include <init/bootlogo.h>
#include <userland/lazybox.h>
#include <userland/sh.h>
#include <userland/shell.h>
static void subos_modular_core_boot(void) {
#if defined(__x86_64__)
pci_init();
#endif
// Storage & Block Layer
printk(KERN_INFO "[4/14] Initializing Block Layer & Storage Controllers... ");
block_init();
page_cache_init();
ramdisk_init();
#if defined(__x86_64__)
ata_init();
ahci_init();
nvme_init();
#endif
virtio_blk_init();
printk(ANSI_BRIGHT_GREEN "OK\n" ANSI_RESET);
// Bus & Devices
printk(KERN_INFO "[5/14] Enumerating System Devices, Canvas & PTY... ");
#if defined(__x86_64__)
virt_init();
fb_init();
bochs_vbe_init();
virtio_gpu_init();
usb_init();
xhci_init();
hwmon_init();
cpufreq_init();
#endif
canvas_init();
pty_init();
virtio_rng_init();
virtio_input_init();
tsc_init();
printk(ANSI_BRIGHT_GREEN "OK\n" ANSI_RESET);
// The framebuffer exists from here on. This kernel boots to a text console,
// so the graphical splash is opt-in via `splash` on the command line --
// raising it by default would hide the very console we are about to use.
// The ASCII logo printed at the top of boot covers the default case.
if (init_has_param("splash") && !init_has_param("nosplash")) {
boot_logo_splash_begin();
}
// Network Subsystem, NetFilter, HTTPD & SSH Server
printk(KERN_INFO "[6/14] Initializing Network Stack, NetFilter, HTTPD & SSHD... ");
boot_logo_splash_progress(40, "Bringing up the network stack");
filter_init();
httpd_init();
sshd_init();
#if defined(__x86_64__)
rtl8139_init();
virtio_net_init();
e1000e_init();
if (e1000_init() || e1000e_is_online()) {
net_init();
socket_subsystem_init();
udp_init();
tcp_init();
dhcp_init();
dns_init();
dns_cache_init();
printk(ANSI_BRIGHT_GREEN "Online\n" ANSI_RESET);
} else {
printk(ANSI_YELLOW "No NIC detected\n" ANSI_RESET);
}
#else
virtio_net_init();
dns_cache_init();
printk(ANSI_BRIGHT_GREEN "Online\n" ANSI_RESET);
#endif
// Sound & Voice Synthesizer
#if defined(__x86_64__)
printk(KERN_INFO "[7/14] Initializing Sound Architecture, Melody Player & Formant TTS... ");
sound_init();
hda_init();
melody_init();
printk(ANSI_BRIGHT_GREEN "OK\n" ANSI_RESET);
#endif
// Crypto, Certificates, LSM Security, Authentication, Namespaces, Rust, SUB-Lang & C++ Subsystems
printk(KERN_INFO "[8/14] Initializing Rust, C++ Core, SUB-Lang Engine, Keyring & Auth... ");
boot_logo_splash_progress(55, "Starting Rust, C++ and SUB-Lang engines");
rust_kernel_init();
cpp_kernel_init();
sub_kernel_init();
prng_seed(0, 0);
certs_init();
security_init();
auth_init();
namespace_init();
printk(ANSI_BRIGHT_GREEN "OK\n" ANSI_RESET);
// Concurrency Primitives: Wait Queues, Futexes & Tiny RCU
printk(KERN_INFO "[9/14] Initializing Wait Queues, Futex Hash & Tiny RCU... ");
boot_logo_splash_progress(65, "Initializing concurrency primitives");
wait_subsystem_init();
futex_init();
rcu_init();
printk(ANSI_BRIGHT_GREEN "OK\n" ANSI_RESET);
// Inter-Process Communication
printk(KERN_INFO "[9/14] Initializing IPC Engine (Pipes, MsgQueues, POSIX SHM, Semaphores)... ");
ipc_init();
posix_shm_init();
printk(ANSI_BRIGHT_GREEN "OK\n" ANSI_RESET);
// Asynchronous I/O Engine
printk(KERN_INFO "[10/14] Initializing io_uring Async Ring Engine... ");
io_uring_init();
printk(ANSI_BRIGHT_GREEN "OK\n" ANSI_RESET);
// Virtual File System & Multi-Filesystem Support
printk(KERN_INFO "[11/14] Mounting Virtual File System (VFS, devfs, procfs, sysfs)... ");
boot_logo_splash_progress(78, "Mounting the virtual file system");
vfs_init();
sysfs_init();
kobject_subsystem_init();
fat32_init();
ext2_init();
initramfs_init();
printk(ANSI_BRIGHT_GREEN "OK\n" ANSI_RESET);
// Kernel Core: Signals, Modules, Syscalls, Tracing, Syslog, Metrics, Crond & Systemd
printk(KERN_INFO "[12/14] Initializing Syslog, Metrics, Cron, Tracing, BPF & Services... ");
boot_logo_splash_progress(88, "Starting kernel services");
signal_init();
workqueue_init();
syscall_init();
module_init_subsystem();
trace_init();
bpf_init();
syslog_init();
metrics_init();
cron_init();
service_manager_init();
printk(ANSI_BRIGHT_GREEN "OK\n" ANSI_RESET);
// Preemptive Multi-Tasking & Userland
printk(KERN_INFO "[13/14] Initializing Preemptive Task Scheduler & LazyBox... ");
boot_logo_splash_progress(95, "Starting the scheduler and userland");
sched_init();
lazybox_init();
ktest_init();
ktest_register_builtin_suites();
printk(ANSI_BRIGHT_GREEN "OK\n" ANSI_RESET);
// Hardware Interrupts
printk(KERN_INFO "[14/14] Enabling Hardware Interrupts... ");
arch_enable_interrupts();
printk(ANSI_BRIGHT_GREEN "ACTIVE\n" ANSI_RESET);
// Return the screen to the console before handing over to the shell.
boot_logo_splash_end();
// Launch Shell
shell_run();
while (1) {
arch_halt();
}
}
#if defined(__x86_64__)
void kernel_main(void* memory_map, uint64_t memory_map_count) {
tty_init();
serial_init();
printk_init();
boot_logo_print_text();
printk(ANSI_BRIGHT_CYAN "=================================================================\n" ANSI_RESET);
printk(ANSI_BRIGHT_CYAN " SUB-OS 64-Bit [%s] Modular Monolithic Kernel %s\n" ANSI_RESET, arch_get_name(), kernel_get_version());
printk(ANSI_BRIGHT_CYAN "=================================================================\n\n" ANSI_RESET);
init_early("root=/dev/sda console=tty1 init=/bin/lazybox quiet");
rtc_init();
printk(KERN_INFO "[1/14] Initializing 64-Bit GDT, IDT, PIC & PIT Timer... ");
arch_init();
printk(ANSI_BRIGHT_GREEN "OK\n" ANSI_RESET);
printk(KERN_INFO "[2/14] Initializing PS/2 Keyboard, Mouse & ACPI... ");
keyboard_init();
mouse_init();
acpi_init();
printk(ANSI_BRIGHT_GREEN "OK\n" ANSI_RESET);
printk(KERN_INFO "[3/14] Initializing Physical PMM, Dynamic Heap & SLAB Cache... ");
pmm_init(memory_map, memory_map_count);
heap_init();
slab_init();
vma_init();
printk(ANSI_BRIGHT_GREEN "OK\n" ANSI_RESET);
subos_modular_core_boot();
}
#elif defined(__aarch64__)
void kernel_main_aarch64(void) {
arch_early_init();
printk_init();
boot_logo_print_text();
printk(ANSI_BRIGHT_CYAN "=================================================================\n" ANSI_RESET);
printk(ANSI_BRIGHT_CYAN " SUB-OS 64-Bit [%s] Modular Monolithic Kernel %s\n" ANSI_RESET, arch_get_name(), kernel_get_version());
printk(ANSI_BRIGHT_CYAN "=================================================================\n\n" ANSI_RESET);
init_early("root=/dev/vda console=ttyAMA0 init=/bin/lazybox quiet");
printk(KERN_INFO "[1/14] Initializing AArch64 CPU, GICv2, Generic Timer & MMU... ");
arch_init();
printk(ANSI_BRIGHT_GREEN "OK\n" ANSI_RESET);
printk(KERN_INFO "[2/14] Initializing Physical PMM, Dynamic Heap & SLAB Cache... ");
pmm_init(NULL, 0);
heap_init();
slab_init();
vma_init();
printk(ANSI_BRIGHT_GREEN "OK\n" ANSI_RESET);
subos_modular_core_boot();
}
#elif defined(__arm__) || defined(__armv8i__)
void kernel_main_armv8i(void) {
arch_early_init();
printk_init();
printk(ANSI_BRIGHT_CYAN "=================================================================\n" ANSI_RESET);
printk(ANSI_BRIGHT_CYAN " SUB-OS 32-Bit [%s] Modular Monolithic Kernel %s\n" ANSI_RESET, arch_get_name(), kernel_get_version());
printk(ANSI_BRIGHT_CYAN "=================================================================\n\n" ANSI_RESET);
init_early("root=/dev/vda console=ttyAMA0 init=/bin/lazybox quiet");
printk(KERN_INFO "[1/14] Initializing ARMv8i CPU, GICv2, Generic Timer & MMU... ");
arch_init();
printk(ANSI_BRIGHT_GREEN "OK\n" ANSI_RESET);
printk(KERN_INFO "[2/14] Initializing Physical PMM, Dynamic Heap & SLAB Cache... ");
pmm_init(NULL, 0);
heap_init();
slab_init();
vma_init();
printk(ANSI_BRIGHT_GREEN "OK\n" ANSI_RESET);
subos_modular_core_boot();
}
#endif